VW touran 2.0 tdi EDC16 wrong file flash recovery HELP

by **Shooting** » Thu Oct 18, 2018 10:29 pm

ultra wrote:That is the file I took originally with mpps and has been making mods from it and written back with mpps via obd.

I got some help, I will post updates

Your Original file is identicle to this: http://www.ecuconnections.com/forum/vie ... 902#p57944
Is it possible you've overwritten your original with this?

wbr

Do you mean I could use that file for recovery ?

Anyway yesterday first test was write original HK file with bdm and k-tag.Anyway File didnt write and gave something about older version error. Then writing very original file (DR file I took when I bought car, before vw update to HK - attached) and it writes ok. Now I but ecu back to car and fan goes on and gear indicator is flashing. Is that attached file also full bdm file and can you say why its not working now anymore ? Are there way to write that HK back even when it gives that version error ?

If you are unwilling to post label pictures then we can't help you

wbr

by **ultra** » Fri Oct 19, 2018 2:47 am

oh I forgot that, here is ecu label

by **Shooting** » Fri Oct 19, 2018 8:18 am

ultra wrote:oh I forgot that, here is ecu label

Flash this to your car:

wbr

by **ultra** » Fri Oct 19, 2018 6:22 pm

Shooting wrote:
ultra wrote:oh I forgot that, here is ecu label

Flash this to your car:

wbr

Thanks, does this file have my original immo etc inside so car should start right away ? I dont have skills to check that :)

by **Shooting** » Fri Oct 19, 2018 6:52 pm

ultra wrote:
Shooting wrote:
ultra wrote:oh I forgot that, here is ecu label

Flash this to your car:

wbr

Thanks, does this file have my original immo etc inside so car should start right away ? I dont have skills to check that :)

Your Immo is not stored in the Flash, it's stored in the eeprom, you'll be fine flashing this

wbr

by **ultra** » Sat Oct 20, 2018 12:10 pm

ktag is in use but it doesnt let write your file or even my original post#1 file. Is there any way to force write either of these files ?

by **Shooting** » Sat Oct 20, 2018 2:24 pm

ultra wrote:ktag is in use but it doesnt let write your file or even my original post#1 file. Is there any way to force write either of these files ?

Both BDM and OBD on your ecu read the same file, use a BDM100 to write the file I gave you to your ecu

wbr

by **ultra** » Sat Nov 10, 2018 12:03 pm

Shooting wrote:
ultra wrote:ktag is in use but it doesnt let write your file or even my original post#1 file. Is there any way to force write either of these files ?

Both BDM and OBD on your ecu read the same file, use a BDM100 to write the file I gave you to your ecu

wbr

hello little update. bmd100 finally came and with v1255 software it gives attached error on all files. is there any way to go around this ?

by **Shooting** » Sat Nov 10, 2018 12:33 pm

Advanced.jpg

ultra wrote:
Shooting wrote:
ultra wrote:ktag is in use but it doesnt let write your file or even my original post#1 file. Is there any way to force write either of these files ?

Both BDM and OBD on your ecu read the same file, use a BDM100 to write the file I gave you to your ecu

wbr

hello little update. bmd100 finally came and with v1255 software it gives attached error on all files. is there any way to go around this ?

Look at this tab:

wbr

by **ultra** » Sun Nov 11, 2018 8:00 pm

Shooting wrote:
Advanced.jpg
Shooting wrote:
ultra wrote:ktag is in use but it doesnt let write your file or even my original post#1 file. Is there any way to force write either of these files ?

Both BDM and OBD on your ecu read the same file, use a BDM100 to write the file I gave you to your ecu

wbr

Look at this tab:

wbr

It lets write external flash section in picture, but nothing else.

Fans still go on. It doesnt allow writing to eeprom or internal flash with my original file in post 1.

Can I use this since you mentioned earlier that it is identical to my original ? http://www.ecuconnections.com/forum/vie ... 57355e65d3