how i did this mistake ?

Software used for ECU editing

how i did this mistake ?

Postby rikino » Sat Jan 25, 2020 12:29 pm

hello i had made a really bad mistake, i cleaned the throttle with toothbrush and cardirator spray and after i cleaned it when i start the car it was in 2000rpm cold and 1600 rpm when heated, i went to a mechanic shop he did obd test he told me i bombed so much the throttle from my cleaning where i was touching it and it lost its position..... he did some things in his laptop and the rpm went from 1600 to 1300rpm, and he told me that it will get fixed itself but i went lot of rides about 65km and it hasnt fixed yet, i have a galletto calbe do you thing anyone can help me fix it please? i dont have a clue about galleto or why i took this cable from ebay....i want my rpm go to normal things and i am such in pain.....

rikino
New user
 
Posts: 7
Joined: Sat Jan 25, 2020 12:13 pm
Location: Greece

Re: how i did this mistake ?

Postby jurebv » Sat Jan 25, 2020 1:06 pm

great info...is it a car? a plane? formula 1?

User avatar
jurebv
Tuning Service badge A
 
Posts: 811
Joined: Fri Dec 08, 2017 2:28 pm
Location: Makarska, Croatia

Re: how i did this mistake ?

Postby Pukis » Sat Jan 25, 2020 1:27 pm

rikino wrote:hello i had made a really bad mistake, i cleaned the throttle with toothbrush and cardirator spray and after i cleaned it when i start the car it was in 2000rpm cold and 1600 rpm when heated, i went to a mechanic shop he did obd test he told me i bombed so much the throttle from my cleaning where i was touching it and it lost its position..... he did some things in his laptop and the rpm went from 1600 to 1300rpm, and he told me that it will get fixed itself but i went lot of rides about 65km and it hasnt fixed yet, i have a galletto calbe do you thing anyone can help me fix it please? i dont have a clue about galleto or why i took this cable from ebay....i want my rpm go to normal things and i am such in pain.....



Hi mate - calibrate throttle body with service tool - as for example - for VAG cars you can do it with VCDS, Odis.

Pukis
Silver
 
Posts: 84
Joined: Wed Mar 01, 2017 11:55 am
Location: Paris

Re: how i did this mistake ?

Postby rikino » Sat Jan 25, 2020 1:47 pm

jurebv wrote:great info...is it a car? a plane? formula 1?


haha i thought i had wrote it!!!
its a nissan note e11 year model 2009
1400cc gasoline
i have a galletto cable for obd2 and ecu programming i had bought brom ebay but i dont know how to use it....

do you think the mechanic i went he is telling the truth it will autocorrect after some rides? i think its crazy and if it was to do it it would had been already good!!!

rikino
New user
 
Posts: 7
Joined: Sat Jan 25, 2020 12:13 pm
Location: Greece

Re: how i did this mistake ?

Postby Orchid70 » Sun Jan 26, 2020 5:43 pm

You need to go to a garage that has a OBD tool to calibrate the throttle again.
Never move the butterfly in the throttle manually, while the igintion is on. If you have done this you need to do the calibration - as Nissan wants it to be done.
What tool did the garage use? And what did they do?
Any fault codes?

Orchid70
New user
 
Posts: 5
Joined: Sat Jan 25, 2020 8:37 pm
Location: Sweden - Sjöbo

Re: how i did this mistake ?

Postby rikino » Fri Feb 21, 2020 3:55 pm

it is fixed i went to another work shop and he had the same calbe i think it called exboot or xboot , he didnt found any fault codes and then he took my car and went to another technisian who had another cable and he fixed it that easily!!!!
i didnt asked what was the name of cable he told me it was the diagnostic cables fault!!

rikino
New user
 
Posts: 7
Joined: Sat Jan 25, 2020 12:13 pm
Location: Greece

Re: how i did this mistake ?

Postby jurebv » Fri Feb 21, 2020 4:31 pm

launch works great on these, just do throttle reset / relearn

User avatar
jurebv
Tuning Service badge A
 
Posts: 811
Joined: Fri Dec 08, 2017 2:28 pm
Location: Makarska, Croatia


Return to ECU Tuning Software

Who is online

Users browsing this forum: No registered users and 0 guests