Chip Tuning Tools

Tools used for ECU reading and writing

Return to ECU Tuning Hardware

Re: Chip Tuning Tools

Postby ECUTools » Mon Apr 22, 2019 11:22 am

➡❗K-TAG TRICORE SERVICE MODE: THREE NEW SUPPORTED MICROCONTROLLERS!❗⬅

⭐There are three new microcontrollers supported: TC1762 – TC1766 – TC1782.

Polaris, Toyota, BMW, and VAG are just some of the vehicles on which you can work directly through the connector, without opening the ECU.

⭐New ECUs supported by K-TAG with Tricore SM:

PLUGIN TC1762
BOSCH ME17.9.11 IROM TC1762 KIA TSM
BOSCH ME17.9.74 IROM TC1762 POLARIS TSM

PLUGIN C1766
BOSCH EDC17C08 IROM TC1766 KIA/HYUNDAI TSM
BOSCH EDC17C08 IROM TC1766 PIAGGIO TSM
BOSCH EDC17C18 IROM TC1766 OPEL TSM
BOSCH EDC17CP02/C06 IROM TC1766 BMW TSM
BOSCH EDC17U01 IROM TC1766 VAG TSM
BOSCH MED17.3 IROM TC1766 FAL TSM
BOSCH MED17.5.20 IROM TC1766 VAG TSM

PLUGIN TC1782
BOSCH EDC17C47 IROM TC1782 TOYOTA TSM
BOSCH EDC17C84 IROM TC1782 NISSAN TSM
BOSCH ME17.9.20 IROM TC1782 RENAULT TSM
BOSCH ME17.9.52 IROM TC1782 TOYOTA TSM
BOSCH MED17.0.7 IROM TC1782 FORD TSM
BOSCH MED17.5.21 IROM TC1782 VAG TSM
BOSCH MED17.5.25 IROM TC1782 VAG TSM

IMPORTANT: From this firmware version installed on K-TAG, it won’t be possible to use the version 2.47. If you haven’t done it yet, please download the latest version of K-Suite!

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Fri Apr 26, 2019 2:32 pm

➡❗MMC Flasher Update❗⬅

⚡️NEW MODULE - ❗20 Module, Kia/Hundai EDC17❗
Identification, map area reading (slow)/writing via CAN bus, error reading/deleting, virtual reading, checksum correction;

EDC17C08 and EDC17CP14 with any TPROT are supported.

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Mon Apr 29, 2019 3:43 pm

❗❗❗ATTENTION❗❗❗

PCMFlash activations⬅will be❗delayed from May 1st till May 12th❗The waiting period may take up to 24 hours. Please be patient and make orders in advance.

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Mon Apr 29, 2019 4:38 pm

➡❗MMC Flasher Update❗⬅

⚡️NEW MODULE - ❗71 Module, Mitsubishi TCM\CVT\AT\4WD\ACD
Identification, full flash reading, map area writing, checksum correction;

⚡️NEW MODULE - ❗73 Module, Mercedes MED17\EDC17
Identification, map area reading/writing, full flash writing, virtual reading checksum correction, error reading/deleting.

MED17: virtual reading only. Map area writing for tuned files. Stock files can be written in boot and code from the virtual reading database.

EDC17: vitual and real reading of map area. Map area writing for tuned files. Stock files can be written in boot and code from the virtual reading database.

⭐MODULE UPDATE - ❗69 Module, Denso Gen2 SH72xx
Identification, full flash reading/writing, checksum correction, error reading/deleting, EEPROM reading/writing;

Bench work required

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Tue Apr 30, 2019 4:17 pm

❗❗❗ATTENTION❗❗❗

Due to the ➡public holidays in Russia⬅ we will ❗not be able to ship❗ from ❗May 1st till May 5th

The orders and activations are going to be processed as usual during this period, but the waiting period may be longer.❗ Please be patient.

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Wed May 08, 2019 3:26 pm

❗❗❗ATTENTION❗❗❗

Due to the ➡public holidays in Russia⬅ we will ❗not be able to ship❗ from ❗May 9th till May 12th❗

❗The orders and activations are going to be processed as usual during this period, but the waiting period may be longer.❗ Please be patient.

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Wed May 08, 2019 4:09 pm

➡❗K-TAG TRICORE SERVICE MODE: FIVE NEW MICROCONTROLLERS SUPPORTED!❗⬅

⭐There are five new microcontrollers supported: TC1762, TC1766, TC1767, TC1797, TC1793.

Mercedes, Deutz, Nissan, Mahindra, Rotax are just some of the vehicles on which you can work directly through the connector, without opening the ECU.

⭐New ECUs supported by K-TAG with Tricore SM:

✅BOSCH MEG17.9.12 IROM TC1762 KIA TSM
BOSCH MEDV17.2 IROM TC1766 MINI TSM
BOSCH MEDV17.4 IROM TC1766 PSA TSM
BOSCH EDC17C11 IROM TC1766 RENAULT TSM
BOSCH ME17.8.5 IROM TC1766 ROTAX TSM
BOSCH EDC17CP07/CP37 IROM TC1766 TOYOTA TSM
BOSCH EDC17C53 IROM TC1767 MAHINDRA TSM
BOSCH EDC17C42 IROM TC1767 NISSAN/RENAULT TSM
BOSCH EDC17C53 IROM TC1767 GWM TSM
BOSCH EDC17C53 IROM TC1767 LDV TSM
BOSCH EDC17C69 IROM TC1793 SUZUKI TSM
BOSCH EDC17CP62 IROM TC1793 TPROT KIA/HYUNDAI TSM
BOSCH MED17.5.3 IROM TC1793 FCA TSM
BOSCH EDC17C43 IROM TC1797 MERCEDES TSM
BOSCH EDC17CP52 IROM TC1797 IVECO TSM
BOSCH EDC17CP52 IROM TC1797 FCA TSM
BOSCH EDC17CP52 IROM TC1797 MITSUBISHI TSM
BOSCH EDC17CV56 IROM TC1797 DEUTZ TSM
BOSCH MED17.7.1 IROM TC1797 MERCEDES TSM

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Thu May 16, 2019 3:07 pm

➡❗ KESSV2: OBD Protocols for Mercedes AMG and More!❗⬅

⭐You will be able to write the Bosch MED17.7.1, MED17.7.2, MED17.7.3, MED17.7.5 and MED17.7.3.1 ECUs in total safety and efficiency for the models of the German car company!

⭐If you already own a KESSv2, you won’t need to buy anything! You just have to connect your tool, read the ID of the ECU and, thanks to the OBD Virtual Reading mode, in a few seconds you’ll have at your disposal the related Original File. The Virtual Reading feature has never been so effective! We have expanded our server dedicated to Virtual Reading, adding the related original calibrations. The files will immediately allow you to have 80% coverage of Mercedes equipped with ECU Bosch MED17.

⭐If the calibration isn’t available, it’s possible to read it through K-TAG, without having to open the ECU, thanks to the new Tricore Service Mode.

New Mercedes ECUs supported via OBD2 (virtual reading, writing)

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Thu May 16, 2019 4:15 pm

➡❗Autotuner UPDATE❗⬅

Autotuner now supports:

Fiat, Alfa Roméo, Lancia - 1.3 Mjet & 2.3 Mjet

Marelli MJD8 & MJ9DF⭐ – OBD Real Reading (MJD8), OBD Virtual Reading (MJ9DF), OBD Writing;

On the following vehicles:

Alfa Roméo 1.3 Mjet - Marelli MJD8
Alfa Roméo 1.3 Mjet EU6 - Marelli MJ9DF
Fiat 1.3 Mjet - Marelli MJD8
Fiat 1.3 Mjet EU6 - Marelli MJ9DF
Fiat 2.3 JTDm - Marelli MJD8
Fiat 2.3 Multijet2 EU6 - Marelli MJ9DF
Lancia 1.3 Mjet - Marelli MJD8
Lancia 1.3 Mjet EU6 - Marelli MJ9DF

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Fri May 17, 2019 12:24 pm

➡❗K-TAG TRICORE SERVICE MODE: NEW ECU MODELS WITH TC1796 SUPPORTED!❗⬅

⭐Thanks to the new K-Suite and K-TAG update, from today you will be able to work on more ECUs Bosch EDC17 and MEDV17 with TC1796.

✅New ECUs supported by K-TAG with Tricore SM:

BOSCH EDC17C10 XROM TC1796 PSA TSM
BOSCH EDC17CP14 IROM TC1796 VAG TSM
BOSCH EDC17CP14 IROM/XROM TC1796 VAG TSM
BOSCH EDC17CP14 XROM TC1796 VAG TSM
BOSCH EDC17U05 XROM TC1796 VAG TSM
BOSCH MEDV17.2 XROM TC1796 MINI TSM
BOSCH MEDV17.4 XROM TC1796 PSA TSM

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

PreviousNext

Return to ECU Tuning Hardware

Who is online

Users browsing this forum: No registered users and 0 guests