Chip Tuning Tools

Tools used for ECU reading and writing

Re: Chip Tuning Tools

Postby ECUTools » Fri Jul 05, 2019 4:38 pm

➡❗Combiloader Update ver 2.16.7125❗⬅

⚡️ NEW MODULE - ❗Bosch C509 Hyundai/Kia
FLASH-memory reading/writing of Bosch ECUs with C509 processor and FLASH Am29F010 (Bosch M4.6) in Hyundai/Kia vehicles. The module is included in the basic kit.

⚡️ NEW MODULE - ❗SID209 Ford (J2534)
Software and (or) map area writing of SID209 ECUs in Ford Ranger 3.2L Diesel vehicles.

⚡️ NEW MODULE - ❗Siemens SIM2K-25x Hyundai/Kia (J2534)
FULL FLASH and EEPROM reading/writing of Siemens SIM2K-250/251/253 ECUs in Hyundai/Kia vehicles.
ECU opening is required. Checksum correction.

User avatar
ECUTools
Custom Badge A
 
Posts: 76
Joined: Tue Nov 27, 2018 2:29 pm
Location: Russia

Re: Chip Tuning Tools

Postby ECUTools » Thu Jul 11, 2019 9:40 am

➡❗MMC Flasher Update❗⬅

⚡️NEW MODULE - ❗67 Module, BMW Bosch MED17/EDC17 E series
Identification, virtual reading, map area writing, checksum correction (digital signature bypass), error reading/deleting;

Tabs:

- CAN - for the Master ECU;
- Slave - for writing the second ECU (Slave);
- Stock - for getting back to the stock without using the patch to keep the original CVN, for both Master and Slave ECUs;
- Repair - for emergency situations, for both Master and Slave ECUs.

User avatar
ECUTools
Custom Badge A
 
Posts: 76
Joined: Tue Nov 27, 2018 2:29 pm
Location: Russia

Re: Chip Tuning Tools

Postby ECUTools » Fri Jul 12, 2019 11:48 am

➡❗KESSV2: 2019 MAZDA MX-5 SKYACTIV-G NOW VIA OBD2!❗⬅

⭐Thanks to the new update for KESSv2, we are ready with a new protocol dedicated to the Brand Mazda, specifically Mazda Skyactiv-G, equipped with Denso 27522 ECU.

✅New MAZDA ECUs supported via OBD2 (reading, writing):

MX-5 ND2 2.0 SkyActiv-G 6MT 135 kW Denso 27522
MX-5 ND2 2.0 SkyActiv-G 6AT 135 kW Denso 27522

User avatar
ECUTools
Custom Badge A
 
Posts: 76
Joined: Tue Nov 27, 2018 2:29 pm
Location: Russia

Re: Chip Tuning Tools

Postby ECUTools » Mon Jul 15, 2019 10:14 am

➡❗PCMflash Update - ver 1.2.0 (14.07.2019)❗⬅

⚡️NEW MODULE ❗Module 73 - Ford MG1❗
Bosch MG1 ECUs installed with petrol engines in Ford vehicles. Reading, writing, checksum correction.

✅Ford F-150: 3.5L Ecoboost V6 (MG1CS015) [HL3A] [RD/WR/CK]
✅Ford Fiesta 8: 1.5L Ecoboost MT (MG1CS016) [JX6A] [RD/WR/CK]
✅Ford Focus 4: 1.0L, 1.5L Ecoboost MT (MG1CS016) [JX6A] [RD/WR/CK]
✅Ford Focus 4: 1.5L Ecoboost AT (MG1CS017) [JX6A] [RD/WR/CK]
✅Ford Mustang 6: 2.3L Ecoboost (MG1CS017) [JR3A] [RD/WR/CK]
✅Ford Mustang 6: 5.0L Coyote V8 (MG1CS019) [JR3A] [RD/WR/CK]

⚡️NEW MODULE ❗ Module 74 - Toyota/Lexus Gen 3❗

Denso ECUs with R7F701202 processors working via P5-UDS protocol installed with petrol engines in Toyota/Lexus vehicles. Reading, writing, checksum correction.

At the moment the following vehicles are supported:
- Lexus ES250, LS500, UX and some hybrids (ES300h, RAV4) for the European market;
- Camry and Corolla with petrol 2.0L, 2.5L engines for the US market.

✅R7F701202 P5-UDS [RD/WR/CK]

⭐MODULE UPDATE❗ Module 43 - Land Rover EDC17СP42/MED17❗ now supports MED17.1.62

✅2.0L, 2.5L, 4.0L TSI, 4.2L FSI (MED17.1/MED17.1.1/MED17.1.62) [VR/WR/CK]

⭐MODULE UPDATE❗ Module 66 - Honda Bosch❗ now supports EDC17CP50

✅PGM-FI (Bosch EDC17CP50/4MB) [Unlocked] [WR/CK] writing after unlocking with Module 53 or 71

User avatar
ECUTools
Custom Badge A
 
Posts: 76
Joined: Tue Nov 27, 2018 2:29 pm
Location: Russia

Re: Chip Tuning Tools

Postby ECUTools » Wed Jul 17, 2019 3:53 pm

➡❗ KESSV2: MY 2017 JAGUAR AND LAND ROVER VIA OBD2!❗⬅

⭐Now you will be able to work via OBD with LAND ROVER and JAGUAR euipped with MED17.8.32 ECUs and FLEXRAY gateway.

⭐The new protocol dedicated to Jaguar F-Pace, Range Rover Velar and Land Rover Discovery is out, now it will be possible to read and write them through the standard OBD2 connection.

JAGUAR ECUs supported via OBD2 (reading, writing):
F-Pace X761 3.0 V6 SC 280 kW Bosch MED17.8.32 TC1797
F-Pace X761 3.0 V6 SC 250 kW Bosch MED17.8.32 TC1797

LAND ROVER ECUs supported via OBD2 (reading, writing):
Range Rover Velar L560 3.0 V6 SC 280 kW Bosch MED17.8.32 TC1797
Range Rover Velar L560 3.0 V6 SC 250 kW Bosch MED17.8.32 TC1797
Range Rover Sport L494 5.0 V8 SVR 405 kW Bosch MED17.8.32 TC1797
Range Rover Sport L494 5.0 V8 SCV8 375 kW Bosch MED17.8.32 TC1797
Range Rover Sport L494 3.0 V6 SC 250 kW Bosch MED17.8.32 TC1797
Discovery L462 3.0 V6 SC 250 kW Bosch MED17.8.32 TC1797

User avatar
ECUTools
Custom Badge A
 
Posts: 76
Joined: Tue Nov 27, 2018 2:29 pm
Location: Russia

Re: Chip Tuning Tools

Postby ECUTools » Fri Jul 19, 2019 11:14 am

➡❗Autotuner UPDATE❗⬅

Autotuner now supports:

Bosch MDG1 with Aurix & SPC⭐ – Bench full reading (full backup file available), Bench writing;

✅On the following ECUs.

User avatar
ECUTools
Custom Badge A
 
Posts: 76
Joined: Tue Nov 27, 2018 2:29 pm
Location: Russia

Previous

Return to ECU Tuning Hardware

Who is online

Users browsing this forum: No registered users and 0 guests