Remapped Peugeot 406 2.2 HDI

Member tuned cars, achievements, demonstrations, Tips and Tricks.

Re: Remapped Peugeot 406 2.2 HDI

Postby chicl3t » Tue Feb 12, 2013 10:07 pm

please ignore the image with error, is old and as been solved.
now the car have 0 errors, 1 new fuel pomp and new gear box.

chicl3t
New user
 
Posts: 14
Joined: Mon Nov 19, 2012 3:47 pm
Location: portugal

Re: Remapped Peugeot 406 2.2 HDI

Postby ecuedit » Wed Feb 13, 2013 12:47 am

FIle seems quite ok, there is a lot of SW versions for that HW, have made a quick look and it seems OK.
What do you want to get?

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: Remapped Peugeot 406 2.2 HDI

Postby chicl3t » Wed Feb 13, 2013 1:24 am

i want fap off and removed. egr off.....
make my car with extreme performance, but with no smoke.
economy of fuel is important
the car is used in my daily work.

chicl3t
New user
 
Posts: 14
Joined: Mon Nov 19, 2012 3:47 pm
Location: portugal

Re: Remapped Peugeot 406 2.2 HDI

Postby ecuedit » Wed Feb 13, 2013 1:35 am

OK, for commercial stuff please fill out the form here,
you will get all detail info in short time: www.editecu.com

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: Remapped Peugeot 406 2.2 HDI

Postby chicl3t » Wed Feb 13, 2013 1:38 am

is for persoma use and not comercial.

chicl3t
New user
 
Posts: 14
Joined: Mon Nov 19, 2012 3:47 pm
Location: portugal

Re: Remapped Peugeot 406 2.2 HDI

Postby ecuedit » Wed Feb 13, 2013 10:39 am

This forum is for helping each other - to do it by yourself, but if you want us to do it than fill out the form posted above :)

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: Remapped Peugeot 406 2.2 HDI

Postby chicl3t » Wed Feb 13, 2013 12:52 pm

Already filled out and submitted.
I have some urgency because the liquid from my fap is over.
After putting my car all operational'll put hands to work and analyze the original file and the file changed.
At that time I will need a lot of help and hope to learn fast and can also help others.

chicl3t
New user
 
Posts: 14
Joined: Mon Nov 19, 2012 3:47 pm
Location: portugal

Re: Remapped Peugeot 406 2.2 HDI

Postby ecuedit » Wed Feb 13, 2013 6:48 pm

After remap, fap off, and egr off, you have to disconnect vacuum pipe from egr, also you can put plate between intake and egr pipe. You can also disconnect vacum valve from the electricity if you want.

For fap you empty it, cat can stay on the car.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: Remapped Peugeot 406 2.2 HDI

Postby leeuk » Tue Jul 23, 2013 11:53 pm

wow, i thought mine was fast with just a decat :D

leeuk
New user
 
Posts: 3
Joined: Mon Jul 22, 2013 6:25 pm
Location: leicester

Re: Remapped Peugeot 406 2.2 HDI

Postby megavolt0 » Thu Sep 15, 2022 10:10 am

Greetings. I'm trying to find a channel of communication with you. I wrote a comment on YouTube, but you did not answer. I'll duplicate my appeal here:
I am the owner of PEUGEOT 406 Coupe 2.2 HDI, 203. Mileage is about 250000km. A lot of work has been done to date. The following work has been done on the engine and transmission:
1) Installed a single-mass flywheel (excellent condition + aligned) and a new clutch for it;
2) New MAF (NGK);
3) New timing belt, timing rollers, camshaft chain, chain tensioner;
4) Washed the entire intake tract;
5) Installed plug EGR, but not yet removed;
6) installed 6-sp gearbox;
7) all consumables have been replaced;
8) the brake system has been restored, including the functioning of ABS / ESP.
9) Removed the catalyst and FAP filter on the car before me. Apparently, the firmware was modified earlier.

At the moment, from the visible problems, there is a tapping of one of the injectors. I plan to purchase a set of serviceable and trusted injectors. The set of nozzles installed on the machine can be rebuilt with the installation of other atomizers. If this procedure is necessary. I understand that many years have passed since the completion of your 406 project. But I think that your experience and achievements have remained with you)) I would like to repeat the result you achieved. I do not plan to participate in competitions, but I would like to unleash the potential of this engine for comfortable driving. I really don't like its setting in the atmospheric zone. If I need to move quickly, this is not possible on the stock. The car is very thoughtful. But sometimes every second matters. Also, when shifting gears, the turbine speed drops very quickly. I assume that when the accelerator pedal is released, the wastegate opens too much. In order not to lose the spool, a delay in the opening of the wetgate valve is necessary, I believe. So I'm planning on installing a larger GTX-style 9 blade billet compressor wheel. I have the ability to read and write firmware edc15c2. How can I contact you directly?

megavolt0
New user
 
Posts: 3
Joined: Sat Sep 10, 2022 9:03 pm
Location: World

Previous

Return to Member Tuned Cars

Who is online

Users browsing this forum: No registered users and 1 guest