Maps needed for tuning EDC15C2

Posts related to map selection, map location, correct map treatment.

Re: Maps needed for tuning EDC15C2

Postby stanleybg » Fri Sep 12, 2014 10:37 am

Thank you for your help.God bless you :) :thumbup:

stanleybg
Gold
 
Posts: 167
Joined: Thu Mar 29, 2012 12:23 pm
Location: Bulgaria

Re: Maps needed for tuning EDC15C2

Postby andreqn » Sun Sep 14, 2014 9:22 pm

great!!!!

andreqn
Bronze
 
Posts: 32
Joined: Sun Sep 14, 2014 8:56 pm
Location: bulgaria

Re: Maps needed for tuning EDC15C2

Postby stanleybg » Wed Sep 24, 2014 9:04 pm

Can you help me to find Rail Pressure Limiter in this bin file.I found where the bits are 6000 , 6000 , 6000 , 13500 , 13500 but where is the start of the map.I can't find x and y axis.
I understood that the rail pressure and soi uses the same x,y axis.And may be this map uses shared x,y axis ?
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

stanleybg
Gold
 
Posts: 167
Joined: Thu Mar 29, 2012 12:23 pm
Location: Bulgaria

Re: Maps needed for tuning EDC15C2

Postby Vasily_U » Thu Sep 25, 2014 12:23 pm

stanleybg wrote:Can you help me to find Rail Pressure Limiter in this bin file.I found where the bits are 6000 , 6000 , 6000 , 13500 , 13500 but where is the start of the map.I can't find x and y axis.
I understood that the rail pressure and soi uses the same x,y axis.And may be this map uses shared x,y axis ?

Rail Pressure Limiter map
406 sedan niki_rpl.rar

User avatar
Vasily_U
New user
 
Posts: 16
Joined: Sun Jun 08, 2014 1:58 pm
Location: Belarus, Minsk

Re: Maps needed for tuning EDC15C2

Postby Vasily_U » Thu Sep 25, 2014 1:22 pm

Vasily_U wrote:Rail Pressure Limiter map

I can not edit the previos post, write a new one.
406 sedan niki_rpl.rar
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

User avatar
Vasily_U
New user
 
Posts: 16
Joined: Sun Jun 08, 2014 1:58 pm
Location: Belarus, Minsk

Re: Maps needed for tuning EDC15C2

Postby stanleybg » Thu Sep 25, 2014 8:24 pm

Thank you for your help.Strange think is I alreday had found and identifyed these maps.I was not sure in my skills.You remember my previous post that you opened "ORIGINAL FILE MY CAR" I tryed find these Rail Limiter Maps there , but what i found is Rail Limiter Map size 6x14 ? Is that allright.As i read for the maps of EDC15 it should be 8x16.Is this normal.

stanleybg
Gold
 
Posts: 167
Joined: Thu Mar 29, 2012 12:23 pm
Location: Bulgaria

Re: Maps needed for tuning EDC15C2

Postby Vasily_U » Thu Sep 25, 2014 9:24 pm

stanleybg wrote:Thank you for your help.Strange think is I alreday had found and identifyed these maps.I was not sure in my skills.You remember my previous post that you opened "ORIGINAL FILE MY CAR" I tryed find these Rail Limiter Maps there , but what i found is Rail Limiter Map size 6x14 ? Is that allright.As i read for the maps of EDC15 it should be 8x16.Is this normal.

I dont know why, but Rail Limiter Map realy have size 6x14 :crazy:

User avatar
Vasily_U
New user
 
Posts: 16
Joined: Sun Jun 08, 2014 1:58 pm
Location: Belarus, Minsk

Re: Maps needed for tuning EDC15C2

Postby stanleybg » Thu Sep 25, 2014 9:32 pm

Hahaha. Thank you for your answer.Now i know that somethink is :crazy: and the map is 6x14.
Thank you for your time with my learning :thumbup:

stanleybg
Gold
 
Posts: 167
Joined: Thu Mar 29, 2012 12:23 pm
Location: Bulgaria

Re: Maps needed for tuning EDC15C2

Postby manekin13 » Sat Sep 27, 2014 2:56 pm

Hey, I have two questions about HDI.
1.Could You explain me why on the full throttle on the first and second gear fuel quantity is smaller then on the higher gears? I see it in logs of my C5 2.0 HDI. Mainly on the first gear. First gear torque limiter is original set to 100 mm3. Maybe it is not enough air on that gears?
2. I compared 2.0 HDI rail pressure map with rail pressure map of alfa 1.9 jtd 105 and rail pressure of HDI in the middle iq area is much lower( sometimes 150 bar difference). Do You know why it is rail pressure on cruising area on HDI so low? 1.9 jtd seems to be less fuel consuming according to people reports. Could it be according of higher fuel pressure?

manekin13
Bronze
 
Posts: 29
Joined: Tue Jul 15, 2014 8:09 pm
Location: Poland, podkarpackie

Re: Maps needed for tuning EDC15C2

Postby leonevich » Sat Sep 27, 2014 9:05 pm

manekin13 wrote:Hey, I have two questions about HDI.
1.Could You explain me why on the full throttle on the first and second gear fuel quantity is smaller then on the higher gears? I see it in logs of my C5 2.0 HDI. Mainly on the first gear. First gear torque limiter is original set to 100 mm3. Maybe it is not enough air on that gears?

If I understand correctly, then the first and second gear, the turbine not enough time to enter the value of the boost. Check the turbo maps, N75 maps and look smoke map.

leonevich
New user
 
Posts: 21
Joined: Tue Feb 18, 2014 5:33 pm
Location: Belarus

PreviousNext

Return to Map Location and Addresses

Who is online

Users browsing this forum: No registered users and 0 guests