Passat B5.5 2.0 TDI BGW 136 HP 2004 EDC16U31 maps

by **Philsstift** » Sun Feb 14, 2016 3:42 pm

Hi,

just modified my original file with your file as example.
I attached my original file and the modified one. Can you check if this is fine? Also the checksums? (Calculated with WINols, but I'm a newbie and want to make sure they are really right).

Can I ask you how you found the correct adresses inside of the bin? Do you have the damos files or did you work with an instruction?

Kind regards
Philsstift

by **airmax** » Mon Feb 15, 2016 10:45 am

I don't have damos for this engine.
From what i see you have same SW.
So you can use mine file as well. And you will see where dpf switch is ;)

by **Philsstift** » Mon Feb 15, 2016 10:01 pm

Okay, found it. Just the 00001 to 00000 in 1CEE00.
Thanks for your help with the file.
Will try it this weekend.

Best regards!

by **maki4evers** » Mon Feb 15, 2016 10:24 pm

Philsstift wrote:Okay, found it. Just the 00001 to 00000 in 1CEE00.
Thanks for your help with the file.
Will try it this weekend.

Best regards!

correct address is 1CEE0C and you must change 00256 to 00000 in 16-bit.

cheers

by **airmax** » Tue Feb 16, 2016 9:27 am

The switch is under 0x1CEE0C. Its 1 byte. So value 0x01 -> 0x00 to disable.

by **airmax** » Tue Feb 16, 2016 9:30 am

As i told. If PassatTDI is what you read, then You can use 038997016K.data.airmax.DPF_EGR_OFF_HOT_START_FIX_CKECKSUMS.zip it has all required changes.

by **Philsstift** » Tue Feb 16, 2016 8:34 pm

Hey Guys,

thanks for your replies to my post.
@airmax Thanks again for your file. Will use it to flash my ECU.

But I would love to understand what ans how to change.
When I take my original file and search for 1CEE0C WINols can't find anything.
Think it should be between 1CEE00 and 1CEE20, right? But there is nothing.
Do I use the wrong settings?
I attached a screenshot.

Best regards

by **airmax** » Tue Feb 16, 2016 8:42 pm

I suggest you to take a look at manuals from https://sites.google.com/site/vagecumap/ :
https://sites.google.com/site/vagecumap ... 16-hexdump
https://sites.google.com/site/vagecumap/hot-start-fix

by **airmax** » Tue Feb 16, 2016 8:45 pm

Also i'm using freeware hex editor http://mh-nexus.de/hxd/ to compare files in bin.
WinOls has nice diff feature.

by **maki4evers** » Tue Feb 16, 2016 9:17 pm

Philsstift wrote:Hey Guys,

thanks for your replies to my post.
@airmax Thanks again for your file. Will use it to flash my ECU.

But I would love to understand what ans how to change.
When I take my original file and search for 1CEE0C WINols can't find anything.
Think it should be between 1CEE00 and 1CEE20, right? But there is nothing.
Do I use the wrong settings?
I attached a screenshot.

Best regards

which one file are you used to your screenshot ? because this is screenshot from your filem with 1CEE0C address.

PASSAT.png