Did you use an anti-static strap whilst you were performing this?
Maybe you damaged the ecu from static?

Maybe the MPPS is faulty, did you test it on another car?

Maybe wiring damaged on the LOOM PLUG from the car going into the ecu.

Check fuses? Check OBD Port?

Do you see voltage atleast on the mpps?

The issue turned out to be with the file. I went back to the original standard file and redid a remap from that and it runs perfectly now. WinOls must have incorrectly changed a checksum.

What modifications did your customer have? And do you have the fixed file please?

sandor1987 wrote:you could try it with vagsuite ;)

if you need a good tune contact me by pm ;)
i have 2 tested files.

1: 160HP and 380NM
2: 185hp+ and 400NM+

the guy is asking for help not for a tuned file. people who would just offer a tuned file is so desperate for business, if your tuning is so good why don't you give him advice? or assistance?

dmcc16 wrote:I used WinOLS.

update your checksum dll

did you fix the problem?

sandor1987 wrote:you could try it with vagsuite ;)

if you need a good tune contact me by pm ;)
i have 2 tested files.

1: 160HP and 380NM
2: 185hp+ and 400NM+

Interested, can you contact me?

Good afternoon, could anyone adjust my st2 or correct it if something is wrong? It's a Passat 3BG 130hp AVF engine 6V box, the file was already in my ECU, I feel that at low rpm it doesn't respond as it should, and at high rpm it's also missing something... I have a new camshaft, inna black tappets, exhaust direct line, new clutch, injectors pd 150 (BE) turbo 1749VA Repaired..

Thanks to anyone who can help










I would be grateful if anyone can help, thank you