Rate My tune EDC VW 1.9 TDI 110

by **nitruz** » Thu Sep 10, 2015 4:09 pm

So you you recommend,
I lower grades?
Thanks!

by **dmcc16** » Fri Sep 11, 2015 4:27 pm

nitruz wrote:So you you recommend,
I lower grades?
Thanks!

How does the car feel? Do some logs with vcds from 1000 rpm to about 4000 rpm in 4th gear at full throttle and record MAF, IQ, Boost Pressure and SOI and just make sure everything is as it should be. It it's fine then don't make any more adjustments. :)

by **b0lle** » Thu Sep 29, 2016 1:05 pm

I've got a question:
How did you get that file from and to ECU?
Ive got a Ibiza 110HP ASV, too. but i can't read out my ecu data even with vagcommander, galetto or vageepromprogrammer.

In other posts i read that ive got a MSA15 but on the ECU sticker it says EDC15V.
Can anybody help me?

by **sandor1987** » Thu Sep 29, 2016 4:43 pm

b0lle wrote:I've got a question:
How did you get that file from and to ECU?
Ive got a Ibiza 110HP ASV, too. but i can't read out my ecu data even with vagcommander, galetto or vageepromprogrammer.

In other posts i read that ive got a MSA15 but on the ECU sticker it says EDC15V.
Can anybody help me?

whats your ecu number?

by **jdmartins** » Fri Sep 30, 2016 12:45 am

b0lle wrote:I've got a question:
How did you get that file from and to ECU?
Ive got a Ibiza 110HP ASV, too. but i can't read out my ecu data even with vagcommander, galetto or vageepromprogrammer.

In other posts i read that ive got a MSA15 but on the ECU sticker it says EDC15V.
Can anybody help me?

Hi,
Probably your ECU is a 018FB.
This ECU can not be read/write by OBD, you have to unsolder the chips.

by **wicca** » Wed Oct 05, 2016 3:48 pm

Without looking at your file, It seems it follows ok up to 4000 RPM.
Have you tried to close actuator vanes a bit more (2-3%) after 4000 RPM (N75 map) at the last column to see if it helps?

Btw. the pump voltage map, what address is that located?

/Wicca