Problem EDC16C34 after ECUSafe

by **mkho** » Sun Apr 28, 2013 8:44 pm

Hi,

My Car is a 206 1.6 HDI 110 HP. I apply EcuSafe (v1.9.3) to remove DPF but the car can't start. when i replace the bin modified by ecusafe by the ori, the car don't start.
Can someone help me please. I post the Ori and the Mod by EcuSafe. Thank you very much.

by **mkho** » Sun Apr 28, 2013 8:47 pm

The Mod files (withou DPF)

by **zotto** » Mon Apr 29, 2013 1:32 pm

i'm sure you use mpps to read write this ecu. Problem is in mpps, maybe you lost injector coding

it's better use bdm for this car

by **Auditune** » Mon Apr 29, 2013 8:32 pm

Did u chksum file?

by **LipTon** » Mon Apr 29, 2013 10:40 pm

yes wrong cheksumm

by **kawero** » Tue Apr 30, 2013 2:51 pm

Ecusafe modifies the checksum? had understood that it is one of the few applications that do not change

by **serguei** » Sat May 04, 2013 8:48 am

After Ecusafe cheksum need to recalculate.

by **eazydaz** » Sat May 04, 2013 8:58 am

serguei wrote:After Ecusafe cheksum need to recalculate.

right,after ecusafe is checksum necessary

by **diagmoh** » Sun May 05, 2013 12:54 am

HI mkho

i send you your dump with chksumm corrected

paaswor of winrar file in mp

MOD 206 HDI 110 wDPFCHKSUMCORECT.rar

by **mkho** » Sun May 05, 2013 2:41 am

Hi everyone,

Unfortunately i flah my ecu with wrong chksum. I remove the ecu and give it to a someone to flash with bdm with ori files. When i tested it yesterday, nothing no communication with the ecu. I think ecu is now out.
Now when i must remove dpf in edc16c34 i will use volta ( people says that it s better than ecusafe). In all case, before flashing, i will verify the chksum with winols.
Thank you very much for your help, these case is a good lesson for me. Thankd.