Hi, I have issue with my MAF sensor.
Code P0100 Fault flowmeter signal - Air flow too high or too low or short-circuit (permanent)
When engine is off i have 182 mg/imp.
When IQ is 75, then MAF shows 747 mg/imp. AFR should be 11.7:1, but smoke looks looks like 15,5-16:1.
I don't want to change flow meter too fast, i want to check, that problem is with MAF, not with ECU or something else.
Maybe my turbo is weak, and don't deliver proper amount of air.
Thanks in advance
Michał