Golf 4 1.9 TDI AHF Stage 2

Help and tips about your tune, post your work in here.

Return to Rate My Tune

Golf 4 1.9 TDI AHF Stage 2

Postby a1rwalk » Wed Jul 11, 2018 8:52 pm

Hello, I want to rate my stage 2 remap of a VW Golf 4 1.9 TDI AHF 110hp with a turbo from 131 PD and 0.240 nozzles.
I don't have the original file anymore but I'll upload a similar one.
I tried it and there is lots of smoke and I think that I could get more power from this setup.Could you please give me some advices?
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

a1rwalk
New user
 
Posts: 21
Joined: Thu Sep 15, 2016 1:41 am
Location: Bulgaria

Re: Golf 4 1.9 TDI AHF Stage 2

Postby mariusO2 » Sat Jul 14, 2018 9:47 am

I`ll take a look later. :)

mariusO2
New user
 
Posts: 3
Joined: Fri Jul 06, 2018 9:28 pm
Location: lithuania

Re: Golf 4 1.9 TDI AHF Stage 2

Postby davemcm » Sun Jul 15, 2018 7:04 am

As far as I can see it shouldn't smoke, your smoke maps are very conservative.

Is it black smoke? Also, it seems to me that your holding out too much boost up the higher RPM for the PD130 turbo.

From what I hear safe pressure @ 4000RPM is 1450mb, and if possible it should be standard pressure afterwards. I didn't look too much at anything else.

davemcm
New user
 
Posts: 17
Joined: Fri Jun 08, 2018 4:24 am
Location: scotland

Re: Golf 4 1.9 TDI AHF Stage 2

Postby a1rwalk » Sun Jul 15, 2018 7:14 pm

Yes, it is a black smoke, but the car is straight pipe so it could be from this.I will reduce the boost pressure in higher RPM.I want to know how to tune the pump voltage map properly.I increased the on highes mg's the voltage with around 0,2V.

a1rwalk
New user
 
Posts: 21
Joined: Thu Sep 15, 2016 1:41 am
Location: Bulgaria

Re: Golf 4 1.9 TDI AHF Stage 2

Postby a1rwalk » Fri Jul 27, 2018 12:09 am

Okay, so I did some changes on my car - turbo GTB1756VK, 0.240 nozzles, 3 bar map sensor, a camshaft from 1.9 SDI and 11mm pump element and a bigger front intercooler.I'm going to install them these days.Could you give me some suggestions about the turbo pressure that this turbo holds, also what mg/stroke can these nozzle handle and also what should be the SOI map and what pump voltage should be.
Thank you in advice.

a1rwalk
New user
 
Posts: 21
Joined: Thu Sep 15, 2016 1:41 am
Location: Bulgaria

Re: Golf 4 1.9 TDI AHF Stage 2

Postby a1rwalk » Sun Aug 05, 2018 12:26 am

I have a question about calculating the actual mg injected per stroke for the .240 nozzles.I read some topics and articles about the performance upgrades and now some things got clearer to me.I also put a 11mm pump element.What is the correct way to calculate the mg's per stroke, also the SOI and the pump voltage.I would really appreciate it if someone tell me, becouse I want to understand how thinks do.
Here is the original file.
Thanks in advice, Damyan.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

a1rwalk
New user
 
Posts: 21
Joined: Thu Sep 15, 2016 1:41 am
Location: Bulgaria

Re: Golf 4 1.9 TDI AHF Stage 2

Postby a1rwalk » Mon Aug 06, 2018 5:14 am

Can anyone tell me which address it the MAF/MAP switch?

a1rwalk
New user
 
Posts: 21
Joined: Thu Sep 15, 2016 1:41 am
Location: Bulgaria

Re: Golf 4 1.9 TDI AHF Stage 2

Postby a1rwalk » Thu Aug 16, 2018 7:51 am

I did some changes on the remap and now the car is running well without a lot of smoke.But I have a problem with the overboost.I want 1.5 bar boost at WOT and on the boost meter it shows me about 2 bars.I tried to manage the N75 duty cycle but and the vacuum valve on turbo but there are no changes.Could anyone help me, becouse I will blow the turbo Smile Later I will upload the remapped file.

a1rwalk
New user
 
Posts: 21
Joined: Thu Sep 15, 2016 1:41 am
Location: Bulgaria

Re: Golf 4 1.9 TDI AHF Stage 2

Postby arwolc » Wed Sep 05, 2018 8:46 pm

a1rwalk wrote:I did some changes on the remap and now the car is running well without a lot of smoke.But I have a problem with the overboost.I want 1.5 bar boost at WOT and on the boost meter it shows me about 2 bars.I tried to manage the N75 duty cycle but and the vacuum valve on turbo but there are no changes.Could anyone help me, becouse I will blow the turbo Smile Later I will upload the remapped file.

maybe there geometry of turbocharger is clogged? I have the same setup and the same problem. I changed the geometry and all is ok.

arwolc
Bronze
 
Posts: 32
Joined: Wed Dec 04, 2013 8:24 pm
Location: Latvia


Return to Rate My Tune

Who is online

Users browsing this forum: No registered users and 0 guests