PD130 - Maximum Level Acceptable Boost Creep at High RPM?

Posts related to specific vehicles, or any other general tuning info.

Return to General tuning

PD130 - Maximum Level Acceptable Boost Creep at High RPM?

Postby davemcm » Fri Jun 22, 2018 7:29 pm

Hi,

I've recently spent a few weeks reading every bit of tuning info I can find for EDC15 to have a go at tuning my Passat PD130 (AVF).

After doing a few logs I have tweaked the N75 to get nice steady actual boost with no spikes in 1st, 2nd, and 3rd gear.

In 4th and 5th (4th not too bad, 5th is the worst, haven't tried 6th) it's pretty much the same until roughly 3500-4000 where actual boost slowly starts to climb above requested boost

I have attached a screenshot log from 5th gear testing the other night, I stopped early because I saw actual rise so high I decided not to rev out to past 4000.

I have since lowered the requested boost and recduced fuelling after 3500 as sometimes its about 960mbar atmospheric here and I don't want to blow a turbo, but I'd rather not reduce the fuelling so early.

Any suggestions or ideas if that amount of boost creep is acceptable?
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

davemcm
New user
 
Posts: 17
Joined: Fri Jun 08, 2018 4:24 am
Location: scotland

Re: PD130 - Maximum Level Acceptable Boost Creep at High RPM

Postby jurebv » Fri Jun 22, 2018 8:08 pm

Why dont you try to open vanes more from 3250rpm in n75 map

User avatar
jurebv
Tuning Service badge A
 
Posts: 811
Joined: Fri Dec 08, 2017 2:28 pm
Location: Makarska, Croatia

Re: PD130 - Maximum Level Acceptable Boost Creep at High RPM

Postby davemcm » Fri Jun 22, 2018 9:02 pm

jurebv wrote:Why dont you try to open vanes more from 3250rpm in n75 map


I already have, I think thats why it actually underboosts a bit slightly about that RPM.

davemcm
New user
 
Posts: 17
Joined: Fri Jun 08, 2018 4:24 am
Location: scotland

Re: PD130 - Maximum Level Acceptable Boost Creep at High RPM

Postby ceecee » Fri Jun 22, 2018 9:36 pm

It looks like stuck variable geometry (log N75, if it request max discharge at high rpm but boost rise then it is) , incorrect ecu tune or vnt rod position to the limit.

ceecee
Silver
 
Posts: 67
Joined: Sat Aug 19, 2017 7:52 pm
Location: Spain

Re: PD130 - Maximum Level Acceptable Boost Creep at High RPM

Postby jtdpow » Sat Jun 23, 2018 11:04 am

iq quanty??? the tdi 130 turbo is small,if you put too much fuel the geometry cant evacuate too much exhaust gas and boost creep its the result,what is your iq quanty?

jtdpow
Diamond
 
Posts: 215
Joined: Thu Jan 26, 2017 2:19 am
Location: milkyway

Re: PD130 - Maximum Level Acceptable Boost Creep at High RPM

Postby davemcm » Sun Jun 24, 2018 12:31 am

jtdpow wrote:iq quanty??? the tdi 130 turbo is small,if you put too much fuel the geometry cant evacuate too much exhaust gas and boost creep its the result,what is your iq quanty?


This was it, I've reverted back to my old tune with the IQ tapering off from 3500 which seems to have solved it, in my last one I'm sure I was trying to hold 70mg out till 4000rpm then drop.

davemcm
New user
 
Posts: 17
Joined: Fri Jun 08, 2018 4:24 am
Location: scotland


Return to General tuning

Who is online

Users browsing this forum: No registered users and 1 guest

cron