How to properly remove EGR

Posts related to switching of the EGR.

How to properly remove EGR

Postby wygekas » Thu Mar 08, 2018 5:18 pm

Hi. I see a lot of topics about "PLYZ GIB ME ALREADY REMOVED EGR". What i want to understand is how to properly remove EGR my self. Main question is can you simply reprogram MAF map (set highest values so engine gets only fresh air) and then will the engine have proper mixture or it will be lean? I am little bit confued how air fuel mixture will be changed.
*i know if i set all values MAX i will get check engine, its just example.

User avatar
wygekas
New user
 
Posts: 7
Joined: Sun Feb 18, 2018 9:38 pm
Location: trakai

Re: How to properly remove EGR

Postby jurebv » Thu Mar 08, 2018 7:30 pm

depends on which ecu you do it, for example on edc16 you do it by modifying hysteresis...manual in attachment for edc16 ecus

[manual] edc16 EGR OFF.rar
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

User avatar
jurebv
Tuning Service badge A
 
Posts: 811
Joined: Fri Dec 08, 2017 2:28 pm
Location: Makarska, Croatia

Re: How to properly remove EGR

Postby wygekas » Fri Mar 09, 2018 2:27 pm

jurebv wrote:depends on which ecu you do it, for example on edc16 you do it by modifying hysteresis...manual in attachment for edc16 ecus

[manual] edc16 EGR OFF.rar


Very big thanks for those files, they are helpful. But still i want to know how it changes air/fuel mixture when you replace bad gases with fresh air (in other words add more air). Wont engine get hotter? If so which map i need to modify to make mixture stoichometric?

User avatar
wygekas
New user
 
Posts: 7
Joined: Sun Feb 18, 2018 9:38 pm
Location: trakai

Re: How to properly remove EGR

Postby jurebv » Fri Mar 09, 2018 4:00 pm

No edc16 is for diesel engines , more air -> cooler
But you could if u want reduce boost map a bit in those areas where egr was active or decrease vnt n75 map in that area

User avatar
jurebv
Tuning Service badge A
 
Posts: 811
Joined: Fri Dec 08, 2017 2:28 pm
Location: Makarska, Croatia

Re: How to properly remove EGR

Postby augcep » Thu Mar 15, 2018 10:19 am

How about EDC15 maps?:) How to remove EGR there? I believe EDC15 isn't smart enough to notice all values 1020 in EGR map, but I am not really into that, is there a better method?:) Here's my ecu data, would you find a minute or two to remove it? Thanks.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

augcep
New user
 
Posts: 3
Joined: Mon Feb 19, 2018 7:03 pm
Location: Kaunas

Re: How to properly remove EGR

Postby vadja777 » Sat Mar 24, 2018 8:03 pm

augcep wrote:How about EDC15 maps?:) How to remove EGR there? I believe EDC15 isn't smart enough to notice all values 1020 in EGR map, but I am not really into that, is there a better method?:) Here's my ecu data, would you find a minute or two to remove it? Thanks.

To remove EGR valve You need change values to 10200 (16 data bit, decimal numbers) in EGR map. You can find EGR map at 39F36 address. Except the EGR map, there are terms at then EGR valve can work. You can find terms of EGR working at address 3A666 (dimensions 1 x 6). Terms of EGR valves switching on are simple - there must be a defined range of temperatures of engine and there must be a defined range of atmospheric pressure. In this map first 2 numbers - the minimal temperature of including at atmospheric pressure that is indicated in next two numbers. Last 2 numbers are maximal temperature, higher that EGR does not work. If I am not right, please correct me.

vadja777
New user
 
Posts: 7
Joined: Sat Mar 24, 2018 7:00 pm
Location: Latvia

Re: How to properly remove EGR

Postby augcep » Fri Mar 30, 2018 10:36 pm

vadja777 wrote:
augcep wrote:How about EDC15 maps?:) How to remove EGR there? I believe EDC15 isn't smart enough to notice all values 1020 in EGR map, but I am not really into that, is there a better method?:) Here's my ecu data, would you find a minute or two to remove it? Thanks.

To remove EGR valve You need change values to 10200 (16 data bit, decimal numbers) in EGR map. You can find EGR map at 39F36 address. Except the EGR map, there are terms at then EGR valve can work. You can find terms of EGR working at address 3A666 (dimensions 1 x 6). Terms of EGR valves switching on are simple - there must be a defined range of temperatures of engine and there must be a defined range of atmospheric pressure. In this map first 2 numbers - the minimal temperature of including at atmospheric pressure that is indicated in next two numbers. Last 2 numbers are maximal temperature, higher that EGR does not work. If I am not right, please correct me.


Thank you very much buddy, happy easter.

augcep
New user
 
Posts: 3
Joined: Mon Feb 19, 2018 7:03 pm
Location: Kaunas

Re: How to properly remove EGR

Postby UVN VLAD » Wed Sep 05, 2018 7:53 pm

vadja777 wrote:
augcep wrote:How about EDC15 maps?:) How to remove EGR there? I believe EDC15 isn't smart enough to notice all values 1020 in EGR map, but I am not really into that, is there a better method?:) Here's my ecu data, would you find a minute or two to remove it? Thanks.

To remove EGR valve You need change values to 10200 (16 data bit, decimal numbers) in EGR map. You can find EGR map at 39F36 address. Except the EGR map, there are terms at then EGR valve can work. You can find terms of EGR working at address 3A666 (dimensions 1 x 6). Terms of EGR valves switching on are simple - there must be a defined range of temperatures of engine and there must be a defined range of atmospheric pressure. In this map first 2 numbers - the minimal temperature of including at atmospheric pressure that is indicated in next two numbers. Last 2 numbers are maximal temperature, higher that EGR does not work. If I am not right, please correct me.


Guys, i can't find on map the "3A666" line, i can only see "39F36" -_-
even on map e46318d.7z
I am trying to remove my EGR, i set all the values to 10020, do i need to do more or is it ok ?
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

UVN VLAD
New user
 
Posts: 9
Joined: Mon Jul 16, 2018 11:29 pm
Location: Romania

Re: How to properly remove EGR

Postby UVN VLAD » Thu Sep 06, 2018 8:17 pm

UVN VLAD wrote:
vadja777 wrote:
augcep wrote:How about EDC15 maps?:) How to remove EGR there? I believe EDC15 isn't smart enough to notice all values 1020 in EGR map, but I am not really into that, is there a better method?:) Here's my ecu data, would you find a minute or two to remove it? Thanks.

To remove EGR valve You need change values to 10200 (16 data bit, decimal numbers) in EGR map. You can find EGR map at 39F36 address. Except the EGR map, there are terms at then EGR valve can work. You can find terms of EGR working at address 3A666 (dimensions 1 x 6). Terms of EGR valves switching on are simple - there must be a defined range of temperatures of engine and there must be a defined range of atmospheric pressure. In this map first 2 numbers - the minimal temperature of including at atmospheric pressure that is indicated in next two numbers. Last 2 numbers are maximal temperature, higher that EGR does not work. If I am not right, please correct me.


Guys, i can't find on map the "3A666" line, i can only see "39F36" -_-
even on map e46318d.7z
I am trying to remove my EGR, i set all the values to 10020, do i need to do more or is it ok ?


Don't do these it won't work !!!! the car wont start!!!

UVN VLAD
New user
 
Posts: 9
Joined: Mon Jul 16, 2018 11:29 pm
Location: Romania

Re: How to properly remove EGR

Postby UVN VLAD » Wed Sep 19, 2018 8:21 pm

My bad actually i didn't do the checksum that's why it didn't work : :oops:

UVN VLAD
New user
 
Posts: 9
Joined: Mon Jul 16, 2018 11:29 pm
Location: Romania

Next

Return to EGR Off

Who is online

Users browsing this forum: No registered users and 0 guests