307 1.6 HDI dpf removed and remapped - smoke and limp mode

All about how to remove FAP and DPF filters

307 1.6 HDI dpf removed and remapped - smoke and limp mode

Postby sensing » Sat Jul 18, 2015 12:14 pm

Hi guys

i got Peugeot 307 SE 1.6 HDI , 110HP

the main problem was : car had no power
anti poulltion fault on the screen
and the RPM dosn't go over 3000 RPM
the highst speed was 60 M/H


Ecu Model :BOSCH EDC16C34

but the car had alot of smoke comming out of the pipe for the exhaust
i still had the problem with the car

what i did

1. remapped the ecu with winsols fab remove file

2. by pp2000 disabled the fab and the attached pictures shows the configuration

result : car still in limp mode revs 3000 max and there are smoke when i push the acceleration while the car stationary


but there is two permanent fault can't be deleted and the car had a limit revs RPM 3000 Max

can anyone please help me with that faults and the current problem

what shall i do ? or from where shall i begin ? or there is any wrong i did with the configuration ?

any advice any help

thank you

https://drive.google.com/file/d/0B9VdkS81TtY9akY2SEg5LVhETjg/view?usp=sharing

https://drive.google.com/file/d/0B9VdkS81TtY9RUVhOVNZMG9memM/view?usp=sharing

https://drive.google.com/open?id=0B9VdkS81TtY9eU1BREpHdkFlNEU

https://drive.google.com/file/d/0B9VdkS81TtY9SGptZzdhRDMwRTQ/view?usp=sharing

sensing
New user
 
Posts: 7
Joined: Sat Jul 18, 2015 11:43 am
Location: United Kingdom

Re: 307 1.6 HDI dpf removed and remapped - smoke and limp mo

Postby ecuedit » Sat Jul 18, 2015 2:20 pm

hello,
just to note before i write help manuals :) first you need to introdouce yourself,
next you did not read any forum rules and you are linking your attachment out of the board...
so 1 post - help without any rules respecting...

to remove fap system on this ecu is not enough to switch of regeneration,
this ecu has more things depend on fap system. Also your egr is probably faulty.

you need to start over from original:

1. disable regeneration
2. disable aditive tank and message
3. disable all exhaust sensors and fuel cap sensor
4. disable egr
5. sometimes egr is close to the esp comunication so may get some esp errors and so on.

this file needs to be done manualy by expert. no software on market can solve you this problem only manual work.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: 307 1.6 HDI dpf removed and remapped - smoke and limp mo

Postby sensing » Sat Jul 18, 2015 2:57 pm

hi there ,

so sorry for that ,
am it engineer , 26 yaers from uk

i had peugeot 307 1.6 HDi 2005

and i got the car , first day on motor way , there way loss of power so i decided to try to fix it by my self , i bought the PSA interface Version C ,

i checked alot of posts but i didn't find the similar proble as mine

i decided to write a new post

sorry again for breaking thr rules

sensing
New user
 
Posts: 7
Joined: Sat Jul 18, 2015 11:43 am
Location: United Kingdom

Re: 307 1.6 HDI dpf removed and remapped - smoke and limp mo

Postby sensing » Sat Jul 18, 2015 3:03 pm

the fab diables manual

i remapped the car using mpps v16

and disabled the bsi configuration

but there are the faults which in the pictures

sensing
New user
 
Posts: 7
Joined: Sat Jul 18, 2015 11:43 am
Location: United Kingdom

Re: 307 1.6 HDI dpf removed and remapped - smoke and limp mo

Postby sensing » Sat Jul 18, 2015 4:19 pm

i have the original file if i post it could any one help me to disable all of these , because i don't know how to disable these manual and am not expert am just try to help my self


thanks in advance
i really appreciate your help
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

sensing
New user
 
Posts: 7
Joined: Sat Jul 18, 2015 11:43 am
Location: United Kingdom

Re: 307 1.6 HDI dpf removed and remapped - smoke and limp mo

Postby ecuedit » Sat Jul 18, 2015 11:24 pm

now, when you see those 2 errors, click letter "i" at the bottom and show us the Pxxx codes that you have...and after that,
i suggest you change setup of the bsi back to stock as, all modifications will be done in binary.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: 307 1.6 HDI dpf removed and remapped - smoke and limp mo

Postby sensing » Wed Jul 22, 2015 1:18 am

hi

i got the file for the car and then remapped the car (

1. disable regeneration
2. disable aditive tank and message
3. disable all exhaust sensors and fuel cap sensor
4. disable egr
)
the car still as it's limp mode and smoke

the codes for pp2000
p1435
p2408

and then i change the bsi configuration back to normal

still the same

i have no idea what to do now , it might be mechanical problem or this problem with the DPF system caused that limp mode

thanks for your help

sensing
New user
 
Posts: 7
Joined: Sat Jul 18, 2015 11:43 am
Location: United Kingdom

Re: 307 1.6 HDI dpf removed and remapped - smoke and limp mo

Postby dimitar » Fri Jul 24, 2015 2:59 pm

reset ash content in ecu then configure bsi for fuel additive absent and remove fuel aditive module beneath drives seat and finaly write dpf of file in engine ecu

dimitar
New user
 
Posts: 21
Joined: Sun Aug 17, 2014 12:05 am
Location: earth

Re: 307 1.6 HDI dpf removed and remapped - smoke and limp mo

Postby scoppack » Fri Jul 24, 2015 8:41 pm

What is the definite code change for DPF from 02 01 01
is it 02 00 00
00 00 01
02 00 01
or ??

scoppack
Silver
 
Posts: 82
Joined: Fri May 09, 2014 1:53 pm
Location: Wales

Re: 307 1.6 HDI dpf removed and remapped - smoke and limp mo

Postby sensing » Tue Jul 28, 2015 2:32 pm

dimitar wrote:reset ash content in ecu then configure bsi for fuel additive absent and remove fuel aditive module beneath drives seat and finaly write dpf of file in engine ecu



hi there ,

can you please explain more what to do in steps

when i trying to reset the counter for the bsi , its says it happens 6 times before , you can't do that any more

if the fuel cap sensor is faulty does it cause limp mode as well ?


thank you

sensing
New user
 
Posts: 7
Joined: Sat Jul 18, 2015 11:43 am
Location: United Kingdom

Next

Return to FAP / DPF Filter Removing

Who is online

Users browsing this forum: No registered users and 1 guest