EDC15P+ Help!!

Posts relating to recovering blocked ECUs

Return to Recovering ECU

EDC15P+ Help!!

Postby gr33nlemon » Sat Oct 04, 2014 2:19 pm

Hello,

I managed to brick my ecu in a pretty big way. I used an galleto 1260 cable to download the original bin, and modified it from there. After some modification I written the bin to the ecu, laptop plugged in, car was charging, and I didn't have any error. I was very surprized when the car didn't start.When I tried to read the ecu I don't get any response.

So I went to a ,,pro" tuner to recover my ecu, he took my original bin copied with the galleto cable, the nice bit is that it still doesn't start. Si I bought a galleto cable and made a bench so I can write it in boot mode ( don't know why but the ecu doesn't enter boot mode in the car. )

Now I can enter in boot mode every time and write whatever I want, but the car doesn't start, I don't get any reading from it, or ecu id. I tried original files from the web but with the same result. Any suggestions?

The car is an VW lupo 3l, from 2001. I wanted to make an ecu tune with a bit more hp. I need the car ASAP because it's my daily commute vehicle, the other car is a diesel guzzling monster that leaves my pockets dry pretty fast. :D

gr33nlemon
New user
 
Posts: 9
Joined: Fri Sep 26, 2014 11:12 am
Location: Romania

Re: EDC15P+ Help!!

Postby Dakta » Sat Oct 04, 2014 3:45 pm

Can you just confirm for me the procedure you are using to get boot read/write the ecu? As I'm not sure if we're confusing boot read/write with bench read/write. Which is quite different for the purpose of what we might need.

Then it might be worth uploading a read from the ecu as it is (in the no-start condition) so somebody can check the flash consistency.

Dakta
Silver
 
Posts: 71
Joined: Thu Jan 10, 2013 10:09 am
Location: wakefield

Re: EDC15P+ Help!!

Postby gr33nlemon » Sat Oct 04, 2014 4:12 pm

I made myself a bench using a PC source for a steady 12.75V, made the wiring harness, and ground te pin 24 on the AM29F400BT. The in MPPS i select generic and the EDC15+. And I write it with the bin.
I know what I'm doing, it's not my first project, just the first time I work with a VW and the edc15. :)

Update: I uploaded the bin from the 1.4 tdi and it boots on it's own, i can get the ECU id, etc. These ECU's are really bullet proof :))

gr33nlemon
New user
 
Posts: 9
Joined: Fri Sep 26, 2014 11:12 am
Location: Romania

Re: EDC15P+ Help!!

Postby gr33nlemon » Sat Oct 04, 2014 4:17 pm

This is the original bin downloaded with the galleto. I suspect something is missing but the filesize is spot on...

https://www.dropbox.com/s/wcfxzkq5w1bheav/VW%20Lupo%203l%20original?dl=0

gr33nlemon
New user
 
Posts: 9
Joined: Fri Sep 26, 2014 11:12 am
Location: Romania

Re: EDC15P+ Help!!

Postby Dakta » Sat Oct 04, 2014 4:46 pm

That's allright, I just get a lot of people saying they've r/w with a bootloader when they've literally just stuck it on bench!

checks look okay with the uploaded file, i assume it's a none starter if it's written with bootloader with this file?

Dakta
Silver
 
Posts: 71
Joined: Thu Jan 10, 2013 10:09 am
Location: wakefield

Re: EDC15P+ Help!!

Postby gr33nlemon » Sat Oct 04, 2014 5:18 pm

Yes the original software from the ecu is a non starter, and I have checked the check sum in VAGEDCSuite and everything seemed ok. The 1.4tdi software doesn't know what to do with the tiptronic gearbox :), I found another software for the lupo 3l, but I'm waiting for the battery to charge up completely before attempting another start.

gr33nlemon
New user
 
Posts: 9
Joined: Fri Sep 26, 2014 11:12 am
Location: Romania

Re: EDC15P+ Help!!

Postby gr33nlemon » Sat Oct 04, 2014 6:08 pm

Update: It starts with another 3l software, but the immobilizer kicks in, can I extract the immo part from the original bin to the new one?

gr33nlemon
New user
 
Posts: 9
Joined: Fri Sep 26, 2014 11:12 am
Location: Romania

Re: EDC15P+ Help!!

Postby atleti_manu » Mon Oct 27, 2014 11:13 am

some programs such as mpps if you are lucky can unlock the ecu

atleti_manu
New user
 
Posts: 3
Joined: Mon Oct 27, 2014 11:03 am
Location: spain

Re: EDC15P+ Help!!

Postby midnight_man » Sun Sep 24, 2017 1:23 pm

guys anybody have file for EDC15p+ TDI PD 2003 1,9 96kW boot mode?

or I can use OBD read for boot? thanks

midnight_man
Bronze
 
Posts: 39
Joined: Fri Jan 16, 2015 11:37 pm
Location: Slovakia

Re: EDC15P+ Help!!

Postby _TrotyL_ » Wed Sep 27, 2017 7:43 am

038906019GS.zip

038906019KE.zip


That's true , this ECU can make suprise on the bench and nobody knows why, especialy when so much people waiting for efect of your job :D

For me the best for recover is old old machine - KWP2000+.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

_TrotyL_
New user
 
Posts: 16
Joined: Fri Mar 04, 2016 8:21 am
Location: Jaworzno


Return to Recovering ECU

Who is online

Users browsing this forum: No registered users and 1 guest