206 2.0 hdi

Help and tips about your tune, post your work in here.

Return to Rate My Tune

206 2.0 hdi

Postby redeye » Tue Apr 17, 2012 9:39 pm

ori/tune and mappack attached for easy viewing

car details = stock boost/egr delete / no cat

no smoke
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

redeye
Silver
 
Posts: 66
Joined: Fri Apr 13, 2012 9:26 pm
Location: yorkshire uk

Re: 206 2.0 hdi

Postby ecuedit » Tue Apr 17, 2012 11:28 pm

Hi there,
I have made a quick look at your file. I will take some more time to analyze tomorrow.
For now I have some major things:

You can set single value rail diagnostic limiter to 1500bar (dark area).

Last col in ID map is for cold start, you should leave it intacked.
Remove one not needed column, move others to the left and do the recalculation.

SVRPLs are OK.

I would not increase SOI so much

TL - why did you set it so high?

The whole thing is overfueled, you are injecting a lot of fuel but no air

Smoke map has to be done and recalculated

DW is OK

Rail pressure value is nice

Rail map can be done better

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: 206 2.0 hdi

Postby redeye » Wed Apr 18, 2012 9:58 am

i did notice the other morning from cold start it took a little longer i will edit the ID map thanks for pointing this out :D

soi from memory i can inject 63mm3 smoke free with original soi values. i looked at the 110hp model same engine as mine
this runs 4 degree more advance than mine in high iq areas with timing 4 more degree it was 69mm3 before smoke starts

i try retarding start of pilot small amount and adding more pilot quantity i did not notice much difference in smoke or power.

i moved start of pilot and main soi equal amount advance and car feels more powerful.

the smoke map from memory again i thing max logged was 1040 i will check this and rescale

thanks for helping

redeye
Silver
 
Posts: 66
Joined: Fri Apr 13, 2012 9:26 pm
Location: yorkshire uk

Re: 206 2.0 hdi

Postby ecuedit » Wed Apr 18, 2012 12:39 pm

hi there,

yes, you would have even more problems on winter.
and make a calculation for new columns.

About fuel, SOI and other things,I am pointing to you because of mechanical reasons.
I garantee that your head gasket will fail very soon.

Some PP2000 video clips would be fine to see how it runs.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: 206 2.0 hdi

Postby redeye » Wed Apr 18, 2012 7:26 pm

to be safe i will pull some soi advance and lower IQ mm3 i do not wont head gasket problems :)
i see map at 7AAE4 max soi limit set at 30 so i thought i was in safe limit

i have snapon solus pro and this it nice tool for doing log movie record
i will film the movie and upload video when i get some free time.

redeye
Silver
 
Posts: 66
Joined: Fri Apr 13, 2012 9:26 pm
Location: yorkshire uk

Re: 206 2.0 hdi

Postby redeye » Thu Apr 19, 2012 8:20 pm

2 avi logs attached from 1500 to 4500 3rd gear pulls parameters 1 and 2 i view with vlc player
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

redeye
Silver
 
Posts: 66
Joined: Fri Apr 13, 2012 9:26 pm
Location: yorkshire uk


Return to Rate My Tune

Who is online

Users browsing this forum: No registered users and 0 guests