BDM Adapters that support 4 different flashers

Tools used for ECU reading and writing

BDM Adapters that support 4 different flashers

Postby ecuedit » Fri Dec 20, 2013 9:21 pm

(pictures at the bottom)

SUPPORTS 4 DIFFERENT FLASHERS
It can be safely* used to flash the ECU over BDM. Bosch BDM 4 in 1 L supports CMD100, KTAG, FGtech Galletto2 and XPROG-m. Precisly designed BDM adapter for safe handlig that minimises the risk while connecting to Engine Control Unit BDM pins.

Technical specification
- supports CMD100, KTAG, FGtech Galletto2 and XPROG-m
- fits to classic BDM frame (this one is 6cm wide), if you need non standard 4cm wide adapter for non standard BDM frame, please click HERE
- supports stable and precise connection - with 2.5mm PCB there is no bending
- supports stable and reliable connection with precise golden pogopins
- very good impact resistance and nice handling with smooth PCB rounded edges
- BDM pin 1 marked on the PCB
- BDM ground and +12V pins are marked for BDM pinout identification purposes
- 12V standard DC jack to provide easy and quick power supply
- external 12 V power supply can be used for LEDs and ECU power
- 4 pin header prodiving +12V power output, and 4 pin header for ground output on multiplexer for use to connect on ECUs that require pin connections as well
- 2 LEDs for very good luminosity
- very important cut out edges very close around the pinouts for great view while connecting to the ECU
- clear view of the ECU BDM connector simplifies positioning of the adapter
- connector on multiplexer and connector on adapter are logically placed to avoid mistakes while connecting flat cables
- basic safety warrnings and usage notes are written on PCB
- jumper for turning the ECU ON for Fgtech and XPROG programmer
- adapter dimension: 40mm x 60mm x 2.5mm
- adapter color: green with white print
- multiplexer dimension: 95mm x 33mm x 2.5mm
- multiplexer color: green with white print
- full package weight: 120g
- full package dimension: 5cm x 13cm x 9cm
- package color: gray

Package content:

- adapter
- 1x multiplexer for using the adapter with 4 different flashers (multiplexer can be used with any of our adapters - 1 multiplexer with 4 adapters and 4 different flashers!)
- 2x flat cables 10-10pin (PnP flat cable for CMD100, KTAG, Ggalletto and multiplexer to adapter cable)
- 1x flat cable 16 to 10pin (PnP flat cable for XPROG-m)
- DC 12V power supply cable 1m
- 2x red - power jumper Wires, premium Female/Female (21 x 300 mm)
- 2x black - power jumper Wires, premium Female/Female (21 x 300 mm)
- 1x stackable header for XPROG programmer
- 1x user manual - link to the user manual on this website printed on the label
Warnings:
Requires some basic knowledge for handling.

Make sure the connections between the programmer, mux and adapter is correct to avoid damaging to the ECU and the programmer.
You should triple check that the ground and power pins are in correct place, see you BDM pinout. Do not plug the jumper before you make a connection with an ECU. Once you made a connection than put the jumper to the correct position. Only adapter for BOSCH units has jumper option on other adapters it is not needed.

more details at: http://www.ecubay.com
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: BDM Adapters that support 4 different flashers

Postby Mikeius » Fri Feb 28, 2014 12:48 pm

Very good product i bought it recently and im very satisfied best quality and a must have for a pro chiptunner :thumbup:

Mikeius
New user
 
Posts: 6
Joined: Thu Jul 25, 2013 11:00 am
Location: greece

Re: BDM Adapters that support 4 different flashers

Postby BokiRS » Thu Mar 27, 2014 1:16 pm

Mikeius wrote:Very good product i bought it recently and im very satisfied best quality and a must have for a pro chiptunner :thumbup:

+1

User avatar
BokiRS
Tuning Service badge A
 
Posts: 141
Joined: Mon Aug 12, 2013 10:56 am
Location: Belgrade

Re: BDM Adapters that support 4 different flashers

Postby miss420 » Wed Sep 03, 2014 11:04 am

BokiRS wrote:
Mikeius wrote:Very good product i bought it recently and im very satisfied best quality and a must have for a pro chiptunner :thumbup:

+1

miss420
New user
 
Posts: 2
Joined: Wed Sep 03, 2014 10:52 am
Location: china

Re: BDM Adapters that support 4 different flashers

Postby Scanny » Wed Aug 12, 2015 3:21 pm

Great supplier :thumbup:

Scanny
New user
 
Posts: 3
Joined: Wed Aug 12, 2015 3:10 pm
Location: United Kingdom

Re: BDM Adapters that support 4 different flashers

Postby naskoradew » Mon Jan 18, 2016 8:47 am

Mine arrived few days ago!
Very good products!

naskoradew
New user
 
Posts: 17
Joined: Sat Jan 25, 2014 10:58 am
Location: Bulgaria

Re: BDM Adapters that support 4 different flashers

Postby ALbion » Sun Apr 12, 2020 11:12 am

In description I read about jumper for Bosch ecm. What is jumper and what is used for? Thanks.

ALbion
New user
 
Posts: 3
Joined: Sun Apr 12, 2020 10:52 am
Location: Croatia

Re: BDM Adapters that support 4 different flashers

Postby ecuedit » Sun Apr 12, 2020 10:20 pm

hello, can you qoute what exactly you mean

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: BDM Adapters that support 4 different flashers

Postby Gil777 » Sun Feb 28, 2021 4:28 pm

How can this be used with the 4 different adapater?

Thanks

Gil777
New user
 
Posts: 16
Joined: Sun Feb 28, 2021 4:10 pm
Location: Laguna


Return to ECU Tuning Hardware

Who is online

Users browsing this forum: No registered users and 2 guests