FAP removal citroen c5 2.2hdi 2005

by **Miljac** » Sat Sep 08, 2012 12:31 am

Hello guys!

In Sunday I will remove FAP from ECU with Ecusafe and galletto. Can you help me with the procedure. From start till end what I need to do. Friend of mine today deleted all faults from ECU with Lexia and now I need to remove FAP from ECU. Can I remove and EGR from ECU at the same time? Can it be done automatically with Ecusafe or I need to modify bin file manually? Which Ecusafe is better for my car 2.0.0.0 or 1.9.3.0?

Thank you ;)

by **ecuedit** » Sat Sep 08, 2012 12:37 am

HI,
1.9.1.6 is the best for your car.

You can remove FAP with that version.

EGR has to be removed manually with WinOLS with proper checksum, without checksum you will block your ecu.

You can do it at the same time, first in ECUSafe than in WinOLS.

First read your original ECU file and post it here:
orginal-ecu-files

When you read ecu you will see HW and SW number write it down and post it with your original.

More information here:
dpf-fap-removal-citroen-c5-2-2hdi-02-t247

It is exactly same procedure.

by **Miljac** » Thu Sep 13, 2012 7:21 pm

Hello guys!

I finally removed Fap from ECU, without any problem thanks to Ecuedit. In the end it turned out that I have some other problem except Fap. But in any case, a big thanks to Ecuedit. He is really a good friend. He helped me and guide me because I'm new in all this. And it was not difficult to him answered on all my PM's very, very fast ;)