no reply from ECU

Posts relating to recovering blocked ECUs

no reply from ECU

Postby georgi60 » Wed Jan 01, 2014 7:11 pm

Hi all, happy new year. I have a problem with 2.2DTH , when I try to read the ECU with MPPS I get a message "No reply from ECU".
Where is the problem?
Sorry for my bad english :D

georgi60
New user
 
Posts: 6
Joined: Sat Dec 28, 2013 11:55 pm
Location: Bulgaria

Re: no reply from ECU

Postby alex_sk » Wed Jan 01, 2014 7:32 pm

Immo is unlocked when you read? Without unlocking ecu not answer for read recuest.

alex_sk
Gold
 
Posts: 152
Joined: Wed Dec 05, 2012 3:06 pm
Location: Belarus

Re: no reply from ECU

Postby georgi60 » Wed Jan 01, 2014 8:10 pm

I think the car doesn't have immo, no flashing light, how do you know if there is an immobilizer?
Again sry for my bad english

georgi60
New user
 
Posts: 6
Joined: Sat Dec 28, 2013 11:55 pm
Location: Bulgaria

Re: no reply from ECU

Postby alex_sk » Thu Jan 02, 2014 1:59 pm

Immo always part of ecu software according to international standards.
You mpps tested on other car?
What models of you car and ecu?

alex_sk
Gold
 
Posts: 152
Joined: Wed Dec 05, 2012 3:06 pm
Location: Belarus

Re: no reply from ECU

Postby georgi60 » Thu Jan 02, 2014 2:17 pm

I tested the Peugeot 307 HDI 107 and Seat Ibiza 1.9tdi 131 and read ECU (works well)
I'll take a picture tomorrow because when pressed ECU ID the ECU data is empty (this is 22dth)
p.s I hope you understand my English

georgi60
New user
 
Posts: 6
Joined: Sat Dec 28, 2013 11:55 pm
Location: Bulgaria

Re: no reply from ECU

Postby AC_SHNITZER » Sat Jan 04, 2014 4:08 pm

if ecu is PSG16 (injection pump with 2 plugs ) reading is not possible only write , check ecu type

AC_SHNITZER
New user
 
Posts: 5
Joined: Sat Jan 04, 2014 12:22 am
Location: in the middle of nowhere

Re: no reply from ECU

Postby georgi60 » Sun Jan 05, 2014 1:48 am

I'll check tomorrow, but I think this pump is installed at new models after 2001. My engine is x22dth

georgi60
New user
 
Posts: 6
Joined: Sat Dec 28, 2013 11:55 pm
Location: Bulgaria

Re: no reply from ECU

Postby pitstopservvv » Thu Jan 09, 2014 1:02 am

Let me tell you MPPS read?! JUST DREAM IT!Had tryied everything no way!Maybe galletto 2 but not clone, a european version...Have bin there before and you come to the point when you see less money, no funny!! :x ;)

pitstopservvv
Bronze
 
Posts: 30
Joined: Mon Dec 16, 2013 2:28 pm
Location: slovenia

Re: no reply from ECU

Postby diagram » Sun Jan 19, 2014 9:04 pm

desolder flash and rewrite, try galletto 1260 boot mode mybe work

diagram
Silver
 
Posts: 91
Joined: Wed Nov 06, 2013 8:25 am
Location: EU

Re: no reply from ECU

Postby Biggie » Tue Mar 04, 2014 1:13 am

diagram - It is a wise talker who knows when he has nothing to say.

There is two way to read psg16 x-tool via obd or by psg16 breakout box but not all models or all on the bench via "BDM PORT SOLUTION" full eeprom and flash.
You can program using tools above or by tech2, you can edit the software by reading the 32MB tech2 card.

for psg16 breakout box you can PM

Biggie
New user
 
Posts: 12
Joined: Mon Oct 14, 2013 12:52 am
Location: Poland

Next

Return to Recovering ECU

Who is online

Users browsing this forum: No registered users and 1 guest