MED 17.5 MK6

by **yolonais** » Sun Feb 09, 2020 9:26 pm

jurebv wrote:What happens with ori?

nothing ... the car works with ori but i have to write with Recovery becuse the ecu dont wont it without recovery to write

by **jurebv** » Sun Feb 09, 2020 10:02 pm

Ecu has tprot? If so you nees to unlock it to writw mod by obd

by **yolonais** » Sun Feb 09, 2020 10:07 pm

jurebv wrote:Ecu has tprot? If so you nees to unlock it to writw mod by obd

if i upload the Stage 1 File it works but only if i upload "Pop&Bang" File based on Ori file it wont work.... should i try it maybe with Tricore ? But why is it working 1 Time and after Restart the car not ?

by **jurebv** » Sun Feb 09, 2020 11:52 pm

First thing fuel cut off...you need to raise RPM not lower it
Why change lambda map for pops&bangs?
KFZWMN map you marked wrong and retarded last row
checksums are your main problem afterall

here is your file checksummed but i dont expect it to pop until you fix mistakes i posted above

by **yolonais** » Mon Feb 10, 2020 10:12 am

jurebv wrote:First thing fuel cut off...you need to raise RPM not lower it
Why change lambda map for pops&bangs?
KFZWMN map you marked wrong and retarded last row
checksums are your main problem afterall

here is your file checksummed but i dont expect it to pop until you fix mistakes i posted above

Thanks for this Information, i found the right KFZWMN the picture i was send was the wrong map i raised the map in gear 0 to gear 5 to 5000 rpm ....
I have Changed lambda for a louder pops and bangs it makes a big diffrent betwen lambda 0.8 and 0.7

and i dont know how to remove Tprot on this ecu becuse Kess says it can read an write this by obd..
you know?
so i will try today your file an report if its works

by **yolonais** » Wed Feb 12, 2020 2:41 am

jurebv wrote:First thing fuel cut off...you need to raise RPM not lower it
Why change lambda map for pops&bangs?
KFZWMN map you marked wrong and retarded last row
checksums are your main problem afterall

here is your file checksummed but i dont expect it to pop until you fix mistakes i posted above

Hello Mate, today i tested your File. it is the same Problem as before first Start the engine works, second try with lock and unlock the door the car does not work. ESP / Engine light goes on and the ECU doesnt response so i used Recovery and flash the ori file back on it and it works. on the weekend i will try with boot mode and flash the file again into the ECU and i report. The car makes pop and bangs after flash.... so maybe it will for real the trpot becuse i use the original Kess and this Car was never flash before me.... Maybe i try bootmode with the infineon Tricore i got the Adapter for it too so it should work with the Tprot if i wrote the file while bootmode or not ?