Wanted: Tune for 1.9TDI with Firad 80% and GTB2260VKLR

Here you can post your ECU tuning requests & wishes.

Wanted: Tune for 1.9TDI with Firad 80% and GTB2260VKLR

Postby ziptie.nz » Tue Nov 28, 2023 4:26 am

Hi there,

I am wanting to purchase two tunes for my Project car ( I do have three code blocks available for my car the Third currently is the same as the Second but with Launch control enabled)

I would like a Very Soft "Low" Map for when the weather turns bad wet
and an aggressive "High" Map for when I go to the Drag Strip or Track (or just want to overtake people)

I have EDC15P ECU from PD100 (038 906 019 DD) as my first engine was ATD

1989 MK2 Golf TDI
- 1.9TDI ASZ (PD130)
- Firad 80% AL Injectors
- Mercedes 2260VKLR with Hella Garret Actuator
- 4 Bar Map Sensor
- 83mm MAF Housing
- 2.5" Exhaust Turbo to Tail.
- Tangent Motorsport Multimap with Cruisecontrol

I currently have a Multi Map File with apparently what I have been told are "bad" tunes.
I did not write it nor do I know anything about fine tuning. I just want Maps that work properly.
The only changes I have made are PWM 140HZ PWM Inverted and DTC Off for N75 and maybe some other things, I also use IDLE RPM differences to tell me which Code band is on

https://i.imgur.com/42VDbQzl.jpg
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

ziptie.nz
New user
 
Posts: 18
Joined: Thu Feb 21, 2019 5:17 am
Location: Auckland, New Zealand

Re: Wanted: Tune for 1.9TDI with Firad 80% and GTB2260VKLR

Postby vaggalic » Thu Nov 30, 2023 1:18 am

Hi, what were you looking for?
Do you want to modify the 3 maps and make new ones?
Do you know how to do it yourself if I send you a base of an ARL with Firad 80% and GTB2056V?

User avatar
vaggalic
Silver
 
Posts: 59
Joined: Wed May 01, 2019 10:07 pm
Location: Spain

Re: Wanted: Tune for 1.9TDI with Firad 80% and GTB2260VKLR

Postby ziptie.nz » Thu Nov 30, 2023 1:27 am

vaggalic wrote:Hi, what were you looking for?
Do you want to modify the 3 maps and make new ones?
Do you know how to do it yourself if I send you a base of an ARL with Firad 80% and GTB2056V?


I know how to copy and paste stuff and modify a few bytes and delete DTCS but the tuning side is beyond my knowledge

happy to try thou!

ziptie.nz
New user
 
Posts: 18
Joined: Thu Feb 21, 2019 5:17 am
Location: Auckland, New Zealand


Return to ECU Tuning Requests

Who is online

Users browsing this forum: No registered users and 0 guests