Hello people,
Here is a hard one!
Volvo Truck Engine 16.1 L - 625 HP US Model.
The engine has EGR only (no DPF or SCR-ADBLUE). Also it has a Holset HE551VE electronic controlled VGT and a EGR MAS sensor that measures the EGR flow and the EGR Temperature!
I got the original Volvo programming equipment and the original flash file from the Volvo trucks ...!
This is not a ECM reading file.
The file has 3 parts ... DST1, DST2 and MSW.
In DST1 are a bunch of maps ... in DST2 are the DTC and also some maps. MSW is just the manufacturer software (nothing interesting here)
DO NOT ASK ABOUT CHECKSUM! I don't have it and I don't needed. I've modified these file for many times and put them back to the flash programming and is working great without cheksum thing!
I was able to close the EGR valve (it has just 1 egr valve) from the ECU but the engine doesn't run right!
Also I have some maps that I don't know they are for ...
I don't know which maps are SOI or duration of injection also and I cannot find anything that looks like MAPS selector based on engine temperature!
All mods via winols full version!
Disconnecting the wires from the EGR valve or EGR MAS will throw a code, will reduce the torque about 25% and will increase the fuel consumption!
I've tried many combinations and I cannot get it right!
I think it has 2 mods of operation ... one with EGR ON other with EGR OFF but the one with EGR OFF will increase the fuel consumption!
Intel HEX files!
DST1 ... no offset
DST2 ... 2085000 offset
Anyone can help a little please?
Anybody can help a little??