Volta 1.2 Experience

by **brunomotor** » Wed Jan 15, 2014 12:30 am

Hello, many people say that Volta is crap. Did anyone ever successfully applied to any EDC? Did it work anywhere?

greez Florian

by **avtodiagnostic** » Wed Jan 15, 2014 12:46 am

I think, the best is you made a file, and than compare the two files, and you will see what it has changet, sometimes it change nothing :D

by **brunomotor** » Wed Jan 15, 2014 9:03 am

That was my idea to. The EGR Mods in Volta are horro.
I made a VW T5 EDC16U31 2.5 tdi file DPF Off with volta and compare it in ols. It looks not so bad.. The Switch ist Changed and a few bits more. I dont know is it The DTC Table :( i have not enough experience in this...

second I try a EDC16U31 from a 220 CDI. In this file Volta Change only two maps the values to 00000. Bevore they look like SOI map.

- How many solutions are there to DPF Off on EDC 16 ?
- how can I switch off DTC table ? Is it a must have on DPF Off mod?

I will try dpf off on a VW Crafter 2.5 TDI EDC 16 with BJK Engine. Does only turn off the DPF Switch work ?

Greez Florian

by **avtodiagnostic** » Wed Jan 15, 2014 5:54 pm

hy, vag bosch sistem as i know it is one switch for dpf off ,but all sensors must be ok, i think volta is not so good for dpf off, bether is manuall in winols ;)

by **brunomotor** » Thu Jan 16, 2014 9:05 am

Hy, yes i think so too. Winols is a heavy tool with the right know how.
but it is very hard to learn.

I will try the Switch an see what happen. ThX

by **chli1976** » Thu Jan 16, 2014 1:46 pm

Load up the file i will have a look for DPF off

by **BokiRS** » Thu Jan 16, 2014 3:10 pm

if you want to do things in right way forget software like volta, ecusafe...

by **artech** » Sun Jan 26, 2014 2:00 pm

Works with dpf remove Opel 1.3CDTI, well cleans or removes immo bmw ecu

by **ecuedit** » Tue Jan 28, 2014 3:02 pm

Only proper software/program solutions are solutions which uses only switch solutons, everything else is waste of time and money,
if program does not work that way, than manual solution is the way:

There is online BIN editor BINNECTOR that uses switch solutions only,
every month few solutions are added. No checksum calculations!

http://www.binnector.com