Hey ive got this file made for my passat. 1.9 tdi bls 105hp stock,
He claims 140hp and around 320 nm.

What do you guys think?

Also i am getting an error when attemting to attach the file so im using limewire, if anyones wondering this is the error.
"Sorry, the board attachment quota has been reached."

https://limewire.com/d/zZXdz#17XhlSxJmk

First of all always upload stock file also to compare with.
Driver Wish maps copied all one over another,but max values are higher than TQ limit map so that’s good.In TQ limit map can add a little bit more at 1500rpm also can extend it a bit more so you have more power on mid to higher revs. NM to IQ map looks good. Duration 0 also looks good just could add 1-2 degrees in SOI. Boost maps also copied one over another,boost request looks good. SVBL maybe a little too high,because it should be last boost limiter so 2400mbar would be good. Anyway looks like some just lazy work because of copied maps. Almost forgot Smoke by MAP left boost axis stock. Could be reworked a little bit. Also need to look at the switch as if I remember these don’t use lambda maps as smoke/fuel limitation,but I’m not sure. Won’t be 140hp on dyno,but car should be more fun to drive. Check the logs and everything,you can push these to 2300-2320mbar of boost and 63-64mg at peak just need to look at live data and cars health. These injectors are not very capable.

Hey thanks for the feedback, but isnt eoi a bit too much?. at 60mg it is around 19 degrees.