Hello I recently finish my ROM, any suggestion? I'm still working in the codeblock selector before start so the current work is in the CB2.
The hardware is the stock of a AWX: GT1749VA, Bosh PD130 inyectors, intercooler... It's run well, funny.

Have a nice day :)

https://cdn.imageurlgenerator.com/uploads/5898e42f-f454-4298-bd64-b916e540e3d7.bin

First of all you didn’t include your stock file. Second thing on Duration 2 RPM axis last value changed to 7500. For what? Same goes to N75 and Boost maps: last RPM values are 7500. Also boost map increase by 10% from stock,IQ values not changed. Peak boost at 3750rpm is 2585mbar requested. In TQ limiter its 85mg. With this boost there’s be good amount of smoke so boost is way too low for that. Also who does it like that? Boost is 10% so same curve as stock: rpm rises,boost drops linearly. And in TQ limiter it’s in reverse: peak IQ is only at 3750rpm. Just my opinion,but a bit strangely done. Also many other small pieces that needs soke attention like strangely done DW map and so on,but ofc it’s just my opinion.

The rom I actually use: https://cdn.imageurlgenerator.com/uploads/2d7e83ec-9e59-46f7-b59b-c97a996fb643.bin
The original (ROM is GS an the other KE because the first was bricked and then broken): https://cdn.imageurlgenerator.com/uploads/4f9591ec-663c-4329-b97b-ed75292e0ae9.bin

7500rmp is for the interpolation of the curve.