Hello guys!

I have a (308 1.6 9HX 90HP) Boost limiter map dimensions are in kg/h not mbar boost as it usally.
I tuned a 307 1.6 hdi before and it has a normal mbar Boost limiter.
Do you have any idea why it could be in kg/h? :O

Attached both pic
(maps are in the same place after Boost maps at both ECU)

I try to calculating the Mass air flow from these datas but it seem 1400-1500mg/strokes at 2500 rpm.. not really seems to limit the 2069 mbar boost as a factory original setup.

Any idea comments?
Maybe is it good to raised up about 8-10percent until 900 mbar of ambient air pressure.

Thanks for the help :)