Hola a todos

Please take a moment and introduce yourself to the ECUEDIT community in this forum. Please do not skip this.

Hola a todos

Postby Josepo20 » Sat Nov 07, 2026 7:48 pm

Hello, I am an aircraft builder in Spain. I’ve built a plane using a 1.6 HDi engine, but I’ve equipped it with a mechanical fuel pump. In this configuration, it produces a lot of smoke and causes issues, so I am experimenting with installing the electronic control unit (ECU) instead—and I’m hoping you might be able to help me with that.You can watch a video of the flight here.https://www.youtube.com/watch?v=r8OP6aC6tqU

Josepo20
New user
 
Posts: 2
Joined: Sat Nov 07, 2026 7:40 pm
Location: España

Re: Hola a todos

Postby Josepo20 » Sat Nov 07, 2026 10:10 pm

In this video, you can see that it produces a lot of smoke: https://youtu.be/FSkJOqUIvq4. Here is a link to a photo of the engine, https://drive.google.com/file/d/1iQvnd68JGCIj75JHgIKFOXabaaW1wzPT/view?usp=sharing which uses a rotary-type injection pump. I am currently testing a 1.4 HDi engine along with its ECU; I’ve managed to get it running well under no-load conditions, but when I try using a 1.6 HDi ECU, it enters "limp mode" (degraded mode).

Josepo20
New user
 
Posts: 2
Joined: Sat Nov 07, 2026 7:40 pm
Location: España

Re: Hola a todos

Postby eutanasio » Mon Nov 16, 2026 5:53 pm

Hola Josepo, encantado.

Casi seguro le faltan sensores/CAN o una buena repro con logs.
Háblame si quieres por privado y lo vemos al detalle

eutanasio
New user
 
Posts: 2
Joined: Wed Aug 12, 2026 1:54 am
Location: Spain


Return to Introduce Yourself - please do not skip

Who is online

Users browsing this forum: No registered users and 0 guests