Hello all, this is the map I’ve been learning to work on, I’ve already had one person to look at it and his opinion was it’s all bad, which probably yeah. The story is 2L BPW A4 B7 on EDC16U31, GT1752 Hybrid turbo, EGR delete, DPF delete, 3 bar map sensor ( I know factory should be 3 bar but it was 2.5 that was on there) I haven’t touched ever map on here some have been done prior the two times I had it done. I haven’t touched N75 maps, IQ by EGTs and there was another one I can’t remember. Disclaimer this map is not on the car, I’m not confident enough in it to run it after making notes about limits and everything, it’s just a pop shot at doing it, I’m trying to push it to 220bhp, around 2bar boost and 450nm of torque plus increasing the limits to read on a diagnostic tool. Any advice on how you would do it, where and how I’ve gone wrong in places any of your thoughts really including light scolding anyway here’s the Bin file
Had to upload to mega here’s the link. TIA

https://mega.nz/folder/9qxygY5T#EzeessZBDhwdAjgdvhZa-A