Hello guys, a few days ago i decided to remap my car. It's a Seat Leon 1.9 ASV VP110 from 2002 with and EDC15VM+V.
I have been searching a lot and i still need to real a lot more on waht to do and what is the best specialy for fuel economy (currently reading a post with more than 100 pages xD).

What i currently have done:
Changed driver wish, boost limit, boost target, SVBL, torque limit, smoke limit and SOI.
Also changed the axis on the smoke limiter to get up to 1000mg of air.
Changed the N146 Pump voltage axis so it now as the limit of 54 mg, cause its the max im requesting with the torque limit map. I know some of you will say that this is nor required, but i have seen a lot of remaps that request 51mg of fuel and then bump the voltage on the 51mg so it gets more than 51 in reality, so i decided to the what i think is more correct. But if i'm wrong, please teach me, i'm here to learn.

Now as far as the economic changes.
Also changed the SOI map, so its a little more advance on the cruise speeds and lower the boost target map on the same areas.
I was thinking in also lowering the n75 map on the same areas by 10% so i get less back preassure.

Also disabled the egr.
My car is stock, 0.205 nozzels and 10mm pump. I have reaplaced the DMF for and SMF, but i dont know how much it can handle so i dont know if maybe i need to lower the torque.

Finaly i also extended the IQ diagnostic so i can read up to 60mg of fuel in vagcom.

IF you guys can take a look at it, i would be very grateful.

Note: my car had already a remap so i will attach a stock map so you can compare it aswell.

https://we.tl/t-RWfKhRkyWBTmVmyx