Hi Team,

Hope you are all well.

I was wondering if someone with a little bit more experience than myself, (just starting to dabble in ECU Editing) is able to assist.

I would like to setup a Simpe Launch control in the car using stock ECU just by cutting ignition and adding fuel etc that you would normally need to do, nothing fancy just that, I ideally don't want to have to do the MerpMod and learn and understand all of that as I am not really clued up on that stuff.

I wanted to know what settings and name of definition I should ideally change to accomplish this, I usually try myself before asking but don't want to break anything, my understanding is retarded the ignition to around -10 or -20 or so then adding some fuel aswell not sure on values on the fueling side.

Around the Ranges of 4000RPM to 7000RPM on 0 Engine Load of course so the moment there is load it will launch and will be on full boost during that time.

Any help is welcome, please have mercy on me as I know the forums can be a bit brutal when it comes to replies.
, 30 day limit on opening file

https://cn-ho-vault.classnetworks.com/#/send/yMor0FYuzUq_4bN2APdXvw/n3MFS4JYrLSCVBsS6NOYdQ