Hello,

I've been working on this map for a long time, it was just a regular stage 1 before I change the turbo, it was running perfect, must have been around 180+hp,

But now I upgraded to a GT1752, so my goal was a 16afr more or less, 80mg and 2700mbar.
I'm running the joined map currently and the car works perfectly, only a tiny bit of smoke and quite faster than stage 1 but on the vcds logs it shows that Im only injecting 70mg, even though I ask evrywhere for 80....
Does anyone have an idea of what is blocking me to inject 80mg ? And it stops at 70 flat on the logs, not even 71 or 72.
Could it be just the reading limit of my VCDS version ?
But the car should be around 220hp I think if it was injecting 80mg, it feels strong but doesn't feel like 220 at all.

Can someone please have a look at it and tell me what you think ? Even if you see other issues I would be happy to hear it.

Thanks a lot in advance!

PS: I don't have the ori file, lost it ..... my bad.

YoItsMobz wrote:Hello,

I've been working on this map for a long time, it was just a regular stage 1 before I change the turbo, it was running perfect, must have been around 180+hp,

But now I upgraded to a GT1752, so my goal was a 16afr more or less, 80mg and 2700mbar.
I'm running the joined map currently and the car works perfectly, only a tiny bit of smoke and quite faster than stage 1 but on the vcds logs it shows that Im only injecting 70mg, even though I ask evrywhere for 80....
Does anyone have an idea of what is blocking me to inject 80mg ? And it stops at 70 flat on the logs, not even 71 or 72.
Could it be just the reading limit of my VCDS version ?
But the car should be around 220hp I think if it was injecting 80mg, it feels strong but doesn't feel like 220 at all.

Can someone please have a look at it and tell me what you think ? Even if you see other issues I would be happy to hear it.

Thanks a lot in advance!

PS: I don't have the ori file, lost it ..... my bad.

I can't see where you're not limiting to 80 Mg/St but found a couple of unrelated problems, fixed below
Mainly N75 in 4x4


wbr

I cannot open the file in EDCSuite, do you know why by any chance ?