Land Rover Defender

by **petbeemer** » Mon Feb 11, 2013 2:10 pm

Im trying to locate a picture or better still description of the early TD5 chip, i believe it to be a plcc 32 pin?

by **mode.sector** » Thu Feb 14, 2013 1:07 am

hi petbeemer,

in first td5 ecu you have one plcc 44...

by **petbeemer** » Sat Feb 16, 2013 8:39 pm

mode.sector wrote:hi petbeemer,

in first td5 ecu you have one plcc 44...

Thank you that's what i was after, now do you know if it sits in a zif socket?

by **mode.sector** » Tue Feb 19, 2013 1:46 am

unfortunately no...

by **petbeemer** » Tue Feb 19, 2013 8:05 pm

mode.sector wrote:unfortunately no...

so you have to desolder it from the board?

by **jpclourenco** » Sun Feb 24, 2013 9:43 pm

Hi,

I have a Defender TD5 from 1999, is it possible to be remap? Where can i get some files for using with MPPS?

Many thanks

by **mexanico1971** » Wed Mar 13, 2013 5:31 am

jpclourenco wrote:Hi,

I have a Defender TD5 from 1999, is it possible to be remap? Where can i get some files for using with MPPS?

Many thanks

I think you will nedd a willem or something like that !

by **TiagoC** » Wed Mar 20, 2013 7:30 pm

199 should be PSOP44, it rw writable but you need to dessolder in order to program it.

by **Fasg** » Sun Mar 31, 2013 6:33 pm

Hi,

Defender 1999 ECU MSB PLCC44 AT27C1024! you need to remove and program a new one.

Regards,

Fasg

by **hbalazs** » Mon May 06, 2013 7:52 pm

This is ecu partial checksum?thx

AUTOTUNER