EDC16u34 Mpps v18 problem

Posts relating to recovering blocked ECUs

Return to Recovering ECU

EDC16u34 Mpps v18 problem

Postby rebok159 » Tue Apr 26, 2022 4:57 pm

Hello. I have the following problem. I flashed my ecu on an audi a3 8p 1.9 tdi several times with Mpps and there was never a problem. Recently I tried to flash again, everything was fine, 100% done, no bugs yet engine won't start. When I flash the previous setup the engine starts well. Checksums checked in winols. Anyone have any idea? I will add that I was using Mpps v18.

rebok159
New user
 
Posts: 15
Joined: Thu Feb 24, 2022 4:01 pm
Location: Poland

Re: EDC16u34 Mpps v18 problem

Postby Shooting » Tue Apr 26, 2022 5:36 pm

rebok159 wrote:Hello. I have the following problem. I flashed my ecu on an audi a3 8p 1.9 tdi several times with Mpps and there was never a problem. Recently I tried to flash again, everything was fine, 100% done, no bugs yet engine won't start. When I flash the previous setup the engine starts well. Checksums checked in winols. Anyone have any idea? I will add that I was using Mpps v18.


Clone tools are a joke, try with recovery mode and reflash

wbr

User avatar
Shooting
Diamond
 
Posts: 1569
Joined: Thu Jan 12, 2017 11:43 am
Location: North Wales

Re: EDC16u34 Mpps v18 problem

Postby ceecee » Wed Apr 27, 2022 1:41 am

a) your mod file has any issue
b) mpps does chk wrong for that mod

ceecee
Silver
 
Posts: 68
Joined: Sat Aug 19, 2017 7:52 pm
Location: Spain

Re: EDC16u34 Mpps v18 problem

Postby rebok159 » Wed Apr 27, 2022 4:04 pm

Shooting wrote:
rebok159 wrote:Hello. I have the following problem. I flashed my ecu on an audi a3 8p 1.9 tdi several times with Mpps and there was never a problem. Recently I tried to flash again, everything was fine, 100% done, no bugs yet engine won't start. When I flash the previous setup the engine starts well. Checksums checked in winols. Anyone have any idea? I will add that I was using Mpps v18.


Clone tools are a joke, try with recovery mode and reflash

wbr

I tried, it did not work. I thing is a mpps problem because with ktag by bdm everything is ok. But I want to be sure that it's the Mpps fault because the edc15 drivers are flashing well

rebok159
New user
 
Posts: 15
Joined: Thu Feb 24, 2022 4:01 pm
Location: Poland

Re: EDC16u34 Mpps v18 problem

Postby rebok159 » Wed Apr 27, 2022 4:07 pm

ceecee wrote:a) your mod file has any issue
b) mpps does chk wrong for that mod

Mod file is ok.
I tried checksum correction by mpps, winols but the problem persist

rebok159
New user
 
Posts: 15
Joined: Thu Feb 24, 2022 4:01 pm
Location: Poland

Re: EDC16u34 Mpps v18 problem

Postby selveti7 » Fri Apr 29, 2022 1:07 am

your mod file will work but you have to write that file in bench with ktag ... good luck

User avatar
selveti7
Gold
 
Posts: 147
Joined: Sat Feb 06, 2021 11:23 pm
Location: Switzerland

Re: EDC16u34 Mpps v18 problem

Postby rebok159 » Thu May 05, 2022 4:52 pm

Here is the ori file and mod
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

rebok159
New user
 
Posts: 15
Joined: Thu Feb 24, 2022 4:01 pm
Location: Poland

Re: EDC16u34 Mpps v18 problem

Postby rebok159 » Mon May 09, 2022 2:20 pm

selveti7 wrote:your mod file will work but you have to write that file in bench with ktag ... good luck

Hi, I solved the problem. I had to uncheck "calculate checksum" option in winols. Engine starts well now after each flashing.

rebok159
New user
 
Posts: 15
Joined: Thu Feb 24, 2022 4:01 pm
Location: Poland


Return to Recovering ECU

Who is online

Users browsing this forum: No registered users and 1 guest