Volvo edc15c11

Help and tips about your tune, post your work in here.

Return to Rate My Tune

Volvo edc15c11

Postby vytt » Sun Mar 29, 2020 6:06 pm

Hello, I hope everyone is ok with all going on, wish U all the best.

Can someone have a little free time to check first my try to remap old Volvo EDC15C11 (D5244T)?
This is 96kw version and I want to have about 125kw 360nm, a little bit under standart D5 (120kw and 340nm).

I don't change SOI, and DUR maps, because I don't understand how to do it right. Also I find strange limiter and I misunderstand, maybe you can tell something about it?

Add original and moded files, map pack and strange limiter picture.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

vytt
New user
 
Posts: 20
Joined: Thu Apr 21, 2016 9:36 am
Location: Lithuania

Re: Volvo edc15c11

Postby edix » Sun Mar 29, 2020 7:47 pm

hello

that "stange limiter" is start iq... look at the axis ;) will help u

the file is not ready to 125kw, it will need more

edix
New user
 
Posts: 11
Joined: Sat Apr 05, 2014 12:48 pm
Location: oporto

Re: Volvo edc15c11

Postby vytt » Mon Mar 30, 2020 7:36 am

edix wrote:hello

that "stange limiter" is start iq... look at the axis ;) will help u

the file is not ready to 125kw, it will need more

Thank you :angel: I was thinking that if I add more fuel than standart D5, it was a little bit stronger. Can you say any advise?

vytt
New user
 
Posts: 20
Joined: Thu Apr 21, 2016 9:36 am
Location: Lithuania

Re: Volvo edc15c11

Postby edix » Mon Mar 30, 2020 7:17 pm

yes

check svbl
iqs limiter
soi
tl
dw

if you need help, talk to me, i can give you some hints

edix
New user
 
Posts: 11
Joined: Sat Apr 05, 2014 12:48 pm
Location: oporto

Re: Volvo edc15c11

Postby vytt » Mon Mar 30, 2020 9:34 pm

edix wrote:yes

check svbl
iqs limiter
soi
tl
dw

if you need help, talk to me, i can give you some hints

Thanks ;)
I was thinking that org svbl is 2350mbar and I only requesting 2170mbar, so I think SVBL is correct.
IQ limiters (atmo and temp) raised in safe zone (only warm engine), with my request in TL.
SOI - I thinks it is correct, because I only request 64 mm3 and it is calculated from factory (65mm3).
TL is a little bit higher standart D5 (120kw). Max torque at 2.5k-3.25k rpm because this car have very veak DMF from factory...
DW copied from D5 (120kw), and about 85-95% pedal have max permissible mm3.

Am I thinking right?

vytt
New user
 
Posts: 20
Joined: Thu Apr 21, 2016 9:36 am
Location: Lithuania

Re: Volvo edc15c11

Postby vytt » Thu Apr 30, 2020 1:29 pm

Car going well, case can be closed ;)

vytt
New user
 
Posts: 20
Joined: Thu Apr 21, 2016 9:36 am
Location: Lithuania


Return to Rate My Tune

Who is online

Users browsing this forum: No registered users and 4 guests