Audi 3.0 TDI Drivers Wish

Posts related to map selection, map location, correct map treatment.

Audi 3.0 TDI Drivers Wish

Postby pmtuner1 » Wed Feb 13, 2013 12:41 am

Hello,

Anyone who knows what conversion formula to use in the 3.0 TDI Drivers Wish?

Thanks!!

pmtuner1
New user
 
Posts: 7
Joined: Sat Dec 15, 2012 7:17 pm
Location: Norway

Re: Audi 3.0 TDI Drivers Wish

Postby Amon103 » Mon Mar 04, 2013 2:29 am

if this is not what you need

In order to see the X-axis (0.0122)

best regards

Amon103
New user
 
Posts: 2
Joined: Mon Mar 04, 2013 1:58 am
Location: SMDSMD

Re: Audi 3.0 TDI Drivers Wish

Postby wiski » Fri Mar 22, 2013 10:52 pm

What is 0.0122?
It is IQ in these not torque as in 2.0

wiski
Bronze
 
Posts: 35
Joined: Fri Mar 22, 2013 8:02 pm
Location: Pristina

Re: Audi 3.0 TDI Drivers Wish

Postby RPM freak » Sat Mar 23, 2013 11:48 am

3.0 TDI uses EDC16 ECU.

Drivers wish map is in NM. Factor is 0.1 to get the requested NM.
X axis is pedal position in %. Factor is 0.0122
Y is RPM factor 1

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: Audi 3.0 TDI Drivers Wish

Postby wiski » Sat Mar 23, 2013 12:51 pm

Of course it's edc16.
I haven't see till now 3.0 tdi in which you need to apply that factor for pedal %
Z is in mg not in Nm in this ecu

wiski
Bronze
 
Posts: 35
Joined: Fri Mar 22, 2013 8:02 pm
Location: Pristina

Re: Audi 3.0 TDI Drivers Wish

Postby RPM freak » Sat Mar 23, 2013 2:22 pm

I have made a typing mistake. The correct factor for X is 0.01

EDC16 DW maps are always in NM

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: Audi 3.0 TDI Drivers Wish

Postby pmtuner1 » Tue Mar 26, 2013 12:12 am

Thanks all you for all answeres!
I was also learned that EDC16 uses Nm as Z factor in DW but in this case I doubt as the max number is "900".
I more think it is 90 mm3 fuel.

Anyone who KNOWS for SURE?

pmtuner1
New user
 
Posts: 7
Joined: Sat Dec 15, 2012 7:17 pm
Location: Norway

Re: Audi 3.0 TDI Drivers Wish

Postby wiski » Tue Mar 26, 2013 10:13 am

VW group doesn't use mm3. They use mg.

wiski
Bronze
 
Posts: 35
Joined: Fri Mar 22, 2013 8:02 pm
Location: Pristina

Re: Audi 3.0 TDI Drivers Wish

Postby RPM freak » Tue Mar 26, 2013 11:08 am

In your DW map you can ask for 1 000 000 Nm. Still the torque will be limited by Torque Limiter map.

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: Audi 3.0 TDI Drivers Wish

Postby pmtuner1 » Thu Mar 28, 2013 12:21 am

Request of mg fuel or mg air on the DW?

Of course the Nm will get limited after the DW but realistic would be to have top value quite near true value.
Othervise gas pedal would be "flat" in this case after 50% travel if linear.

pmtuner1
New user
 
Posts: 7
Joined: Sat Dec 15, 2012 7:17 pm
Location: Norway

Next

Return to Map Location and Addresses

Who is online

Users browsing this forum: No registered users and 3 guests