PD130 Tune Help

Help and tips about your tune, post your work in here.

Return to Rate My Tune

PD130 Tune Help

Postby Cammo98 » Wed Feb 26, 2020 11:03 pm

Hi Folks,
This is my first major tune that I am attempting, and there are a lot of areas/maps untouched or unfinished, currently working on the Injection maps. Please don't criticize the Amount of Mg/st, rather if the extrapolation to achieve them is correct. 37.5* DOI was chosen as I read that past this can cause high EGTs, and 28* SOI because past this the (stock) injectors can't create the injection pressure needed, again I am very new and learning. The main area I am struggling with is the Operating Temp SOI map, below 1250RPM is untouched FYI. Any advice would be greatly appreciated. I intend this to run with 1.8/85bar of boost at peak.

I am using VAGEDC15P+Suite.
No Original map, car was bought tuned.

Melett PD150 Turbo
Front Mount Intercooler
Turbo Back straight pipe
PD150 Headbolts

Cammo
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

Cammo98
New user
 
Posts: 1
Joined: Thu Feb 20, 2020 5:16 pm
Location: Ireland

Re: PD130 Tune Help

Postby JBispoo » Fri Mar 20, 2020 2:47 pm

Hi im new on this too, around a year studying and apllying on my own cars.
I look at your file and i think you have to mutch in some areas, torque, smoke, and durations.
I have an Asz with a VB 1752 and already achieve 1.8/1.9 bar tested on VCDS.
Now im doing something like 1.820peak and 1.750 constant, no smoke.
You can use PD160 Ori file to see how they did it, compare with your ORI and start from there.

JBispoo
New user
 
Posts: 5
Joined: Tue Mar 10, 2020 12:42 am
Location: Portugal


Return to Rate My Tune

Who is online

Users browsing this forum: No registered users and 1 guest