FIAT Doblo 1,3 2014 MJD8F3 DPF EGR OFF PROBLEM LIMP MODE

by **bluekrash** » Wed Apr 10, 2019 5:36 pm

Hello, I did a FES Replace values (to reset values, was overloaded and can't regenerate in normal operation), then a DPF & EGR OFF, checksum with Winols, write back, but now after rode some km (about 5km) ecu goes to LIMP MODE, 1500rpm limit without any DTC or light on dashboard. IF you turn off and turn on the back to normal, but car back to limp mode after 5km.

MJD8F3 MJ8F3HW1FP 2442D330

I'll appreciate if somebody have similar with this issue and cal give any tip and how to solve.

by **Shooting** » Wed Apr 10, 2019 6:48 pm

bluekrash wrote:Hello, I did a FES Replace values (to reset values, was overloaded and can't regenerate in normal operation), then a DPF & EGR OFF, checksum with Winols, write back, but now after rode some km (about 5km) ecu goes to LIMP MODE, 1500rpm limit without any DTC or light on dashboard. IF you turn off and turn on the back to normal, but car back to limp mode after 5km.

MJD8F3 MJ8F3HW1FP 2442D330

I'll appreciate if somebody have similar with this issue and cal give any tip and how to solve.

Try adding a post here too: introduce-yourself

wbr

by **bluekrash** » Wed Apr 10, 2019 6:56 pm

Shooting wrote:
bluekrash wrote:Hello, I did a FES Replace values (to reset values, was overloaded and can't regenerate in normal operation), then a DPF & EGR OFF, checksum with Winols, write back, but now after rode some km (about 5km) ecu goes to LIMP MODE, 1500rpm limit without any DTC or light on dashboard. IF you turn off and turn on the back to normal, but car back to limp mode after 5km.

MJD8F3 MJ8F3HW1FP 2442D330

I'll appreciate if somebody have similar with this issue and cal give any tip and how to solve.

Try adding a post here too: introduce-yourself

wbr

done, u know what im doing wrong?

by **Shooting** » Thu Apr 11, 2019 11:06 am

bluekrash wrote:
Shooting wrote:
bluekrash wrote:Hello, I did a FES Replace values (to reset values, was overloaded and can't regenerate in normal operation), then a DPF & EGR OFF, checksum with Winols, write back, but now after rode some km (about 5km) ecu goes to LIMP MODE, 1500rpm limit without any DTC or light on dashboard. IF you turn off and turn on the back to normal, but car back to limp mode after 5km.

MJD8F3 MJ8F3HW1FP 2442D330

I'll appreciate if somebody have similar with this issue and cal give any tip and how to solve.

Try adding a post here too: introduce-yourself

wbr

done, u know what im doing wrong?

After DPF & EGR removed did you unplug the sensors?

wbr

by **bluekrash** » Thu Apr 11, 2019 11:04 pm

sensors are connected.
I did some test, writing back original ecu and can rode more long km without got limp mode, so the problem is the software used to remap to delete the dpf and egr. I check in other forums some users test using EGR DPF REMOVER 2017.05 and I see that MJD8F3 works! (at least for a Ducato)
but not for me. So, Im looking for somebody with the map or the expertise can modify the file for me and tell the price.

thanks