How to read Maps if KWP + Galetto are not supported

Post your topic here if there is no suitable forum...

Return to Other

How to read Maps if KWP + Galetto are not supported

Postby rlees85 » Wed May 16, 2012 11:25 am

This might sound abit stupid, but for example cars (as a random example, a K11 Nissan Micra Petrol) how do you read the ECU map??

Many cars (mainly petrols) have an ODB-2 socket but there is no way to read the map using KWP2000+ or Galetto.

How is this done?

Cheers

rlees85
Gold
 
Posts: 158
Joined: Fri Apr 27, 2012 5:32 pm
Location: Macclesfield / Hinckley UK

Re: How to read Maps if KWP + Galetto are not supported

Postby RPM freak » Wed May 16, 2012 9:40 pm

Nissan Micra K11 (1992–1997) is OBD 1 car. The car can not be flashed via diagnostic socket. The only way to read the maps is to take out the chip and read it with eprom programer. Chip tuning the 1.0 L (CG10DE) or 1.3 L (CG13DE) engine is waste of time.

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: How to read Maps if KWP + Galetto are not supported

Postby OdinEidolon » Thu May 17, 2012 10:48 am

RPM freak wrote:Nissan Micra K11 (1992–1997) is OBD 1 car. The car can not be flashed via diagnostic socket. The only way to read the maps is to take out the chip and read it with eprom programer. Chip tuning the 1.0 L (CG10DE) or 1.3 L (CG13DE) engine is waste of time.


I've heard this is needed (read the ECU with an eprom programmer) even fot the 2.0L HDi 90hp present in the 306 and 406 range, with Siemens SID80 ECU. Is it true?

OdinEidolon
Site Admin
 
Posts: 362
Joined: Wed Mar 28, 2012 10:41 am

Re: How to read Maps if KWP + Galetto are not supported

Postby RPM freak » Thu May 17, 2012 9:43 pm

For Siemens SID8xx ECU family you need BDM programmer to read and write the files.

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: How to read Maps if KWP + Galetto are not supported

Postby OdinEidolon » Thu May 17, 2012 9:51 pm

RPM freak wrote:For Siemens SID8xx ECU family you need BDM programmer to read and write the files.


Thanks.

OdinEidolon
Site Admin
 
Posts: 362
Joined: Wed Mar 28, 2012 10:41 am

Re: How to read Maps if KWP + Galetto are not supported

Postby rlees85 » Sat May 19, 2012 7:24 pm

The micra was just an example and the later cg10s and cga3de are odb2. Another example would be a petrol Ford cougar. But I am guessing as a rule of thumb if you can't use kwp or galetto then the physical chip needs to be removed? Cheers for replies so far! :)

rlees85
Gold
 
Posts: 158
Joined: Fri Apr 27, 2012 5:32 pm
Location: Macclesfield / Hinckley UK


Return to Other

Who is online

Users browsing this forum: No registered users and 2 guests