nedro wrote:hello everyone
with PP2000, you touch the BSI and ECU
like that you will not have default
good luck
isdeekelis wrote:Hi,
I have followed switch method on 307 1.6hdi 2005 edc16c34, removed FAP via PP2000 in two places in BSI, but i'm still getting errors (in PP2000, not dash) regarding FAP: fuel filler cap, aditive level too low, level to high, additive ECU incorrect value received over CAN. And moreover, all of them are stating that car was running 77kmh while those errors occured, but car was stationary! Have anyone seen such issue? Is there something i could do apart from removing DTC (which i'm not familiar with yet... :crazy: )?
Thanks
raivwo wrote:maxcombor wrote:Maybe i`m doing something wrong this is my file original and moded.no errors with Dpf ecu plugged ,with unnplugedd errors p1435
u0046. Checksum is not corected. Car is not in limp mode but no enough power With dpf off version car make strange sound from turbo and valves and a little bit black smoke .
If You want to play with fault codes, make a map where error codes is in 16bit HiLo hexdecimal format and started at 1C82A6 and map is 4x233.
233 switches for this map is in 8bit format and started at 1C8B44. U-codes looks like cxxx (U0046=c046)
Have a Fun!
Return to FAP / DPF Filter Removing
Users browsing this forum: No registered users and 0 guests