How to read and write an ECU BOSCH ME7.4.6

Posts relating to recovering blocked ECUs

Return to Recovering ECU

How to read and write an ECU BOSCH ME7.4.6

Postby JOE56570 » Sat May 11, 2013 5:49 pm

Hello,
I must change my ECM Bosch ME7.4.6 (on Citroen C5 V6 210HP 3.0l petrol) and I try to retrieve the contents of the eeprom 25C16 (immobilizer) and eeprom AM29ff400 to rewrite on the new (used) . The BSI is original.
I currently own the Citroen tools after sale (Diagbox-Lexia) that does not allow access to the contents of the eeprom 25C16.
I wish to prevent desoldering components.
Can I use a Galletto V2 with BDM probe (JTAG) and if so how in practice. I noticed that on the ME7.4.6 there was a series of copper pads probably destined for testing and programming module.
I wish to purchase a V2 galletto with BDM, but in the application list, the Bosch ME7.4.6 is not listed!
I asked several dealers who do not know!
Can you help me?
Thank you in advance

JOE56570
New user
 
Posts: 4
Joined: Fri May 10, 2013 4:36 pm
Location: Brittany (France)

Re: How to read and write an ECU BOSCH ME7.4.6

Postby ecuedit » Sun May 12, 2013 11:59 am

you can not connect to ME7.4.6 with BDM...there is no pins on it :)
You have to work in boot mode.

Full backup in boot mode can be done with KTAG - that's the best choice, than you can make complete clone of the ECU.
But desoldering immo chip is very easy :) 2min job...

Flashing of eprom can be done with galletto in boot mode or mpps v12 as well (generic mode).
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: How to read and write an ECU BOSCH ME7.4.6

Postby JOE56570 » Tue May 14, 2013 10:32 am

Thank you for your answer :thumbup: , but a galletto 1260 is enough or needed Galleto V2 ?
Otherwise, with MPPS V12, the connections with the plug OBD are the same that with Galletto (as described in your guide for read/write ME7.4.6) ?

JOE56570
New user
 
Posts: 4
Joined: Fri May 10, 2013 4:36 pm
Location: Brittany (France)

Re: How to read and write an ECU BOSCH ME7.4.6

Postby ecuedit » Tue May 14, 2013 2:44 pm

yes obd is obd, plugs are the same, galleto 1260 is enough,
you can flash it and than switch the immo chip and that's it.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: How to read and write an ECU BOSCH ME7.4.6

Postby titi65 » Mon Aug 19, 2013 5:16 pm

Hi !
Do you have sucess in your way ?

I've got same engine in similar car, looking after details too . ..

titi65
New user
 
Posts: 8
Joined: Mon Aug 19, 2013 5:05 pm
Location: france

Re: How to read and write an ECU BOSCH ME7.4.6

Postby ocorrea73 » Tue Oct 29, 2013 6:58 pm

ecu Bosch ME7.1.1

ocorrea73
New user
 
Posts: 3
Joined: Mon Oct 28, 2013 11:47 pm
Location: florida u.s.a

Re: How to read and write an ECU BOSCH ME7.4.6

Postby mediapolska » Thu Nov 13, 2014 6:41 pm

Any news or more details about cutting off immo ?

mediapolska
New user
 
Posts: 3
Joined: Wed Oct 22, 2014 7:04 pm
Location: Poland

Re: How to read and write an ECU BOSCH ME7.4.6

Postby amper1 » Sat Sep 19, 2015 1:53 pm

Hallo,
want to read ME7.5 with MPPS12 via "Generic Bosch ME7.XX 1MB Kline" Protocol,
but can't find a pinout instruction,
please can someone help me with it.

amper1
New user
 
Posts: 4
Joined: Fri Jan 09, 2015 11:17 am
Location: UA Kiev

Re: How to read and write an ECU BOSCH ME7.4.6

Postby ing90 » Sun Sep 20, 2015 8:57 pm

Please give me the car / engine type, but also the "DAM-Code".

Ask google if you don't know, how to find. It's on the tyre pressure sticker.

ing90
New user
 
Posts: 13
Joined: Wed Jun 10, 2015 9:50 pm
Location: Europe

Re: How to read and write an ECU BOSCH ME7.4.6

Postby stanleybg » Mon Oct 05, 2015 10:00 pm

Before write the file in boot mode with generic protocol is it needet to desolder the immo chip ?

stanleybg
Gold
 
Posts: 167
Joined: Thu Mar 29, 2012 12:23 pm
Location: Bulgaria


Return to Recovering ECU

Who is online

Users browsing this forum: No registered users and 1 guest