Rate my 206 HDi

Help and tips about your tune, post your work in here.

Rate my 206 HDi

Postby michass » Mon Aug 17, 2015 7:47 pm

Hello,
Please rate my modification of HDI EDC15C2.
Any comments or sugestions are welcome.
Thanks in advance
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland

Re: Rate my 206 HDi

Postby Deman » Mon Aug 17, 2015 9:33 pm

ori files?

Deman
Diamond
 
Posts: 373
Joined: Sat May 04, 2013 11:17 am
Location: Belarus

Re: Rate my 206 HDi

Postby michass » Tue Aug 18, 2015 6:05 am

Sure :D
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland

Re: Rate my 206 HDi

Postby michass » Tue Aug 18, 2015 7:42 am

I have mappack too :)
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland

Re: Rate my 206 HDi

Postby Deman » Wed Aug 19, 2015 4:21 pm

The ignition angle is usually raised to improve the economy, and you have omitted?
map TL 12 * 1 Return to the original better! otherwise good.

Deman
Diamond
 
Posts: 373
Joined: Sat May 04, 2013 11:17 am
Location: Belarus

Re: Rate my 206 HDi

Postby michass » Wed Aug 19, 2015 5:40 pm

12x1 TL is error mode TL, yes?
Rise SOI map? How much?
Thank you for comments

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland

Re: Rate my 206 HDi

Postby Deman » Wed Aug 19, 2015 8:24 pm

12*1 yes error.
where he worked in the field of EGR + 1 ° I did.

Deman
Diamond
 
Posts: 373
Joined: Sat May 04, 2013 11:17 am
Location: Belarus

Re: Rate my 206 HDi

Postby michass » Wed Aug 19, 2015 9:08 pm

Thanks, but this soi is optimal for economy and power(response).
Btw. I have EGR switch OFF.
I was thinking about FMIC, MBC, and Popcorn launch control. First and second need time and money, for third i haven't enugh knowledge. Iwas read about this, but i can't find helpful informations for this engine

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland

Re: Rate my 206 HDi

Postby Deman » Wed Aug 19, 2015 10:54 pm

search files pdf
EDC15C Funktionsbeschreibung B079.CC0

Deman
Diamond
 
Posts: 373
Joined: Sat May 04, 2013 11:17 am
Location: Belarus

Re: Rate my 206 HDi

Postby michass » Thu Aug 20, 2015 8:08 am

I read this document a little, and i haven't idea how to use it.
I foun on This forum, that i must change single values of gear ratios and first gear TL, but i'm not that expert, to find them.
I afraid that, i change wrong things, for example i don't change rail pressure above 1350bar, beacuse i faund some simillar values to SVRPL, but i don't know, that this values are ecactly SVRPLs. About this Gear ratios, I don't know, how this ratio has shown.
They are Velocity on 1000 RPM for each gear, or maybe typical ratio RPM on IN /RPM on OUT of gearbox.
Do You have any suggestions?
And what about gears TL, when i foud this TL, how check for which gear this TL belong?
Thank you for you help.

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland

Next

Return to Rate My Tune

Who is online

Users browsing this forum: No registered users and 3 guests