ow Galleto 2 Fgtech works?

Tools used for ECU reading and writing

ow Galleto 2 Fgtech works?

Postby dadal » Sun Apr 13, 2014 10:07 pm

can someone tell me how Galleto 2 Fgtech works?, I could only find software installation instructions,
How do I connect to ecu eprom, how do I connect the wires?
does anyone have a PDF or something else?

galletto 1260 is easier, everything works via the OBD socket.

I want to remove IMMO from renault clio 2 1.2 petrol engine, with airco, year 2000, ECU simens sirius 32
eprom 29F200BB ... I want to read /writing it bij OBD2 socket ...
which programmers can read and write the onboard bij OBD2 socket?

Best regards

dadal
New user
 
Posts: 19
Joined: Sun Apr 13, 2014 9:03 pm
Location: holland

Re: how Galleto 2 Fgtech works?

Postby dadal » Wed Apr 16, 2014 8:02 pm

update !!

dadal
New user
 
Posts: 19
Joined: Sun Apr 13, 2014 9:03 pm
Location: holland

Re: ow Galleto 2 Fgtech works?

Postby paulo_ribeiro » Thu Apr 17, 2014 2:43 am

find in the fgtechnology.it site. they have many instruction in pdf to download :)

paulo_ribeiro
Gold
 
Posts: 125
Joined: Wed Apr 16, 2014 12:58 pm
Location: Portugal

Re: how Galleto 2 Fgtech works?

Postby dadal » Sat Apr 19, 2014 11:44 am

paulo_ribeiro wrote:find in the fgtechnology.it site. they have many instruction in pdf to download :)

Thanks Paulo, that link is helpful, I've found these diagrams
JTAG Connection ( I give links because I cant uplaod image to this forum
http://www.fgtechnology.it/IMG_PROGRAMMA/esempio_jtag.jpg
Connection JTAG AUD Renesas for READ:
http://www.fgtechnology.it/collegamento_renesas_read.jpg
Connection Boot Mode Tricore:
http://img46.imagevenue.com/aAfkjfp01fo1i-18329/loc504/789325543_Immagine8046bcopiacopia_122_504lo.jpg

How can I know which connection I need ?

it's a helpful topic for beginners like me, if you want to share your experiences and your talent.
Thanks everybody who shares.

dadal
New user
 
Posts: 19
Joined: Sun Apr 13, 2014 9:03 pm
Location: holland

Re: ow Galleto 2 Fgtech works?

Postby paulo_ribeiro » Tue Apr 22, 2014 4:19 pm

but have you shopping interface?
to read and write have to use this connection at boot mode
http://postimg.org/image/qcgo23p2l/

paulo_ribeiro
Gold
 
Posts: 125
Joined: Wed Apr 16, 2014 12:58 pm
Location: Portugal

Re: ow Galleto 2 Fgtech works?

Postby dadal » Thu Apr 24, 2014 2:28 pm

paulo_ribeiro wrote:but have you shopping interface?
to read and write have to use this connection at boot mode
http://postimg.org/image/qcgo23p2l/


I have not yet purchased interface
I collect information about interface, I have read that the EU version is better, I want to find a good address

would you please tell me I have good connection in this diagram? ? ( or my ECU is deaht now :D )

http://s7.postimg.org/3vjayp8ob/siemens_connection.jpg

12 volt socket to a 12 volt DC power supply? (Such as car batteries) ?
and which cable is K-Line ?
that Gray cable(boot cable) connect to anywhere?

dadal
New user
 
Posts: 19
Joined: Sun Apr 13, 2014 9:03 pm
Location: holland

Re: ow Galleto 2 Fgtech works?

Postby paulo_ribeiro » Thu Apr 24, 2014 11:46 pm

the power supply it's like a phone charger for example.

to the k-line i think its a blue thread.the can high thread. but im not sure :(

paulo_ribeiro
Gold
 
Posts: 125
Joined: Wed Apr 16, 2014 12:58 pm
Location: Portugal

Re: ow Galleto 2 Fgtech works?

Postby paulo_ribeiro » Thu Apr 24, 2014 11:47 pm

the power supply can be the battery of your car.

paulo_ribeiro
Gold
 
Posts: 125
Joined: Wed Apr 16, 2014 12:58 pm
Location: Portugal

Re: ow Galleto 2 Fgtech works?

Postby dadal » Thu Jan 01, 2015 7:42 pm

Can anyone help me on how to wire up this ECU for bootmode?
Fgtech : ......to.....Siemens sirius32 ( without N )
Red ----------------> pin 29
Red ----------------> pin 30
Black ----------------> pin 3 ground
Green ----------------> pin 56 K-Line
I found info K-line is green but manual says green is ignition.

Yellow -----------------> pin 26 L-Line

where to be pin 28 of 29f200bb connected ?
to massa of PCB ecu ?
to black wire of galletto ?
to gray wire of galletto ?

http://www.picresize.com/images/rsz_1siemens_sirius_32.jpg

Thanks for info.

dadal
New user
 
Posts: 19
Joined: Sun Apr 13, 2014 9:03 pm
Location: holland

Re: ow Galleto 2 Fgtech works?

Postby 2xded » Fri Jan 02, 2015 1:10 pm

Red ----------------> pin 29
Red ----------------> pin 30
Black ----------------> pin 3 ground
Green ----------------> pin 56 K-Line (K-line is green)
pin 28 of 29f200bb connected to massa of PCB ecu (through a resistor 8-10 Kom) or to gray wire of galletto.
Good luck

2xded
Silver
 
Posts: 73
Joined: Fri Dec 27, 2013 12:48 pm
Location: Russian

Next

Return to ECU Tuning Hardware

Who is online

Users browsing this forum: No registered users and 0 guests

cron