C5 2.0 HDI 90cv edc15c2

Posts related to map selection, map location, correct map treatment.

C5 2.0 HDI 90cv edc15c2

Postby kikus820 » Thu Oct 02, 2014 10:45 pm

Hi could anyone help me with this maps. It is my first map finding and i'm not sure if i'm rith
thanks

kikus820
New user
 
Posts: 4
Joined: Sun Sep 21, 2014 9:47 pm
Location: spain

Re: C5 2.0 HDI 90cv edc15c2

Postby kikus820 » Thu Oct 02, 2014 11:29 pm

sorry but idon't know how to upload my ori
i will try to do by an external link

kikus820
New user
 
Posts: 4
Joined: Sun Sep 21, 2014 9:47 pm
Location: spain

Re: C5 2.0 HDI 90cv edc15c2

Postby kikus820 » Thu Oct 02, 2014 11:35 pm

here is some maps founded im not sure if it is correct
6A9D2 (16x16) Advance injection time (RPM x IQ = Injection angle BTDC)
7A9D2 (16x16) Advance injection time (RPM x IQ = Injection angle BTDC)
67328 (10x16) Boost Pressure (Throttle Position x RPM = Boost)
674A4 (10x16) Boost Pressure (Throttle Position X RPM = Boost)
77328 (10x16) Boost Pressure (Throttle Position X RPM = Boost)
774A4 (10x16) Boost Pressure (Throttle Position X RPM = Boost)
68564 (6x8) Drivers Wish (Throttle Position X RPM = IQ)
685E8 (6x8) Drivers Wish (Throttle Position X RPM = IQ)
78564 (6x8) Drivers Wish (Throttle Position X RPM = IQ)
785E8 (6X8) Drivers Wish (Throttle Position X RPM = IQ)
61E3E (16x16) EGR (Can't Figure Out Axes)
71E3E (16x16) EGR (Can't Figure Out Axes)
6236A (20x16) Injection Duration (IQ x Rail Pressure = Duration in milliseconds)
6AE22 (20x16) Injection Duration (IQ x Rail Pressure = Duration in Milliseconds)
7236A (20x16) Injection Duration (IQ x Rail Pressure = Duration in Milliseconds)
7AE22 (20x16) Injection Duration (IQ x Rail Pressure = Duration in Milliseconds)
6698E (10x16) I believe this to be an N75 Map? (unknown axes)
66BD8 (10x16) as above
7698E (10x16) as above
76BD8 (10x16) as above.
6B19A (16x14 OR 16x13??) Pre Injection Quantity (X x Y = pre injection IQ in mg/r)
7B19A as above.
6ABD2 (16x16) Preinjection time (RPM x IQ = Preinjection degrees BTDC)
7ABD2 (16x16) Preinjection time (RPM x IQ = Preinjection degrees BTDC)
69288 (16x16) Rail Pressure (Throttle position x RPM = rail pressure in Bar)
79288 (16x16) Rail Pressure (Throttle Position x RPM = rail pressure in Bar)
69656 (17x9) Rail Pressure Limiter (X x Y = Rail Pressure in Bar) One of these limiters isn't selected correctly...
79666 (17x8) Rail Pressure Limiter (X x Y = Rail Pressure in Bar)
67DB4 (16x16) Smoke Map (RPM x Air flow (don't know the unit!!) = IQ)
77DB4 (16x16) Smoke Map (RPM x Air flow = IQ)
67D46 (19x1) Torque Limiter (RPM limits IQ)
77D46 (19x1) Torque Limiter (RPM limits IQ)
67144 (10x10) Atmospheric Correction (X x Y = Z)
77144 (10x10) Atmospheric Correction (X x Y = Z)
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

kikus820
New user
 
Posts: 4
Joined: Sun Sep 21, 2014 9:47 pm
Location: spain

Re: C5 2.0 HDI 90cv edc15c2

Postby manekin13 » Sat Oct 04, 2014 1:21 pm

Hey, some missing maps:
62782 injection start (IQ x rpm = BTDC)
63810 boost limit by temperature( boost x temp )
66742 boost limit ( rpm x temp = boost limit)
6698E,66BD8 VNT maps ( IQ x rpm = VNT duty)
67144 boost limit by atmospheric pressure ( IQ x atm pressure)
678CA, 6792E two important IQ limit by temperature maps ( temp x rpm = IQ limit)
679DE starting IQ
690C8 Rail precontrol valve map( rail pressure x rpm = valve duty)
Maps in 7XXXX analogy.
Axises for SOI and rail maps are on the area 610XX, IQ axis up to 5500, rpm up to 4500. Every IQ including IQ in Smoke map is in mm3.
To calculate AFR in SMoke map You must convert it into mg( factor 0.083). Egr map axises are IQ up to 40 mm3 x rpm up to 2800. In boost pressure and rail pressure axis there isnt throttle position but IQ. Rail limiter is 8x16 map. I think in 2.0 HDI 90 cv there is not electronic boost control so you dont need to change boost releted maps.
Greetings. If You need more help write it into the topic.

manekin13
Bronze
 
Posts: 29
Joined: Tue Jul 15, 2014 8:09 pm
Location: Poland, podkarpackie

Re: C5 2.0 HDI 90cv edc15c2

Postby zangler » Mon Dec 08, 2014 9:30 pm

Hi!
Is there really a vnt table at 6698E,66BD8 VNT maps ( IQ x rpm = VNT duty) in your file?
My HDI 90 has a wastegate turbo. So i wonder if a VNT upgrade is possible with this file.

zangler
New user
 
Posts: 10
Joined: Mon Dec 08, 2014 7:59 pm
Location: Austria

Re: C5 2.0 HDI 90cv edc15c2

Postby sparco » Tue Dec 09, 2014 2:21 am

Yes

you need to locate the boost strategy switch to enable vnt control

sparco
Diamond
 
Posts: 203
Joined: Tue Dec 31, 2013 12:44 am
Location: Belgium

Re: C5 2.0 HDI 90cv edc15c2

Postby simonsan » Tue Mar 03, 2015 10:53 pm

thanks all for the information

simonsan
New user
 
Posts: 6
Joined: Tue Mar 03, 2015 10:50 pm
Location: Lisboa

Re: C5 2.0 HDI 90cv edc15c2

Postby m0rgan » Sun Apr 05, 2015 8:33 pm

manekin13 wrote:Hey, some missing maps:
62782 injection start (IQ x rpm = BTDC)

I cant find this map. Did you help?

m0rgan
New user
 
Posts: 5
Joined: Thu Nov 07, 2013 1:32 pm
Location: Minsk


Return to Map Location and Addresses

Who is online

Users browsing this forum: No registered users and 1 guest