FAP remove

All about how to remove FAP and DPF filters

FAP remove

Postby tundmatu99 » Tue Oct 09, 2012 11:37 am

Hei!
How can I remove FAP with my car.?

Car:
peaugeot 607 2.2HDI 2001
ECu 0281 010 567
soft 1037 35 3843

Original:
http://www.hot.ee/ok66/607_original.Bin

I remove with EcuSAFE 2, but it is a problem...
i drive my car (about 25km with highway), then lighting CHECK ENGINE..and no power.
which may be a problem`?

This is change file:
http://www.hot.ee/ok66/607_original_no_fap.Bin

tundmatu99
New user
 
Posts: 11
Joined: Wed May 16, 2012 8:31 pm
Location: Pärnu/Estonia

Re: FAP remove

Postby stilo115cv » Thu Oct 11, 2012 10:46 pm

Hi

this file switch off the regeneration

You must reprogramming BSI : in order of reprogramming it, switch off all dpf funcion
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

stilo115cv
New user
 
Posts: 15
Joined: Sun Sep 16, 2012 7:53 pm
Location: italy

Re: FAP remove

Postby ecuedit » Thu Oct 11, 2012 11:29 pm

stilo115cv --> You have 2 incorrect checksums you probably missed ;)
That would block tundmatu99s ECU (but even if that would happen, EDC15C2 can take a lot of mistakes...).

I made modifications out of the original with correctly calculated checksums.
File is attached.

We usually do not do that,
we like to help but user has to do it by himself, but in this case better that than blocked ECU.

tundmatu99, you will not have problems with this file,
but for policy reasons - use it at your own risk in any case - read that twice ;)

stilo115cv check if you have automatically enabled checksum corrections or not.

Regards
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: FAP remove

Postby tundmatu99 » Fri Oct 12, 2012 3:12 pm

ecuedit wrote:stilo115cv --> You have 2 incorrect checksums you probably missed ;)
That would block tundmatu99s ECU (but even if that would happen, EDC15C2 can take a lot of mistakes...).

I made modifications out of the original with correctly calculated checksums.
File is attached.

We usually do not do that,
we like to help but user has to do it by himself, but in this case better that than blocked ECU.

tundmatu99, you will not have problems with this file,
but for policy reasons - use it at your own risk in any case - read that twice ;)

stilo115cv check if you have automatically enabled checksum corrections or not.

Regards



Thank you, I trust you and write the file into my car tomorrow.

tundmatu99
New user
 
Posts: 11
Joined: Wed May 16, 2012 8:31 pm
Location: Pärnu/Estonia

Re: FAP remove

Postby mexanico1971 » Fri Oct 19, 2012 3:04 am

I have one case of a C5 fap off by ecusafe cracked and after sometime the car go to safe mode !
always say"s boost over limited !
it gives more work, but is best to do it, by hand in the software editor !
BR

mexanico1971
Silver
 
Posts: 87
Joined: Wed Sep 19, 2012 3:08 am
Location: Portugal

Re: FAP remove

Postby ecuedit » Fri Oct 19, 2012 7:18 am

Always is the best way to do it manualy knowing what exactly you are doing.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: FAP remove

Postby tundmatu99 » Fri Nov 02, 2012 1:51 pm

what still may be a problem if the force continues to disappear?
The text to be displayed - Anti-pollution faulty

tundmatu99
New user
 
Posts: 11
Joined: Wed May 16, 2012 8:31 pm
Location: Pärnu/Estonia

Re: FAP remove

Postby ecuedit » Fri Nov 02, 2012 3:44 pm

I do not understand what you want to say.
Do you still get antipollution fault on the dashboard?

Connect with diag and than tell me the error if this is what you want to say.

It can also be overboost...because on the dashboard always antipollution fault is shown for different errors...or egr :)
connect with peugeot planet 2000 and look at the engine error code & description also click on letter i to see all details.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union


Return to FAP / DPF Filter Removing

Who is online

Users browsing this forum: No registered users and 0 guests