EGR 1.4 HDi EDC16C34

Posts related to switching of the EGR.

Return to EGR Off

EGR 1.4 HDi EDC16C34

Postby spidi347 » Fri May 23, 2014 1:30 pm

Hi,

Colleagues, I have another question. I have a 206 1.4 HDi 8v 2005 the factory without FAP'a and wheels dual mass. In my car, the driver should sit EDC16C3, but recently I found that I founded EDC16C34. And they występywało in the newer 1.4 HDi FAP and 1.6 HDi FAP also. Does this mean that someone put it to me and I have uploaded from my previous map? Do you put it in and turned off the FAP? For the diagnosis of error codes work, because I had a small little problems with the car and everything came out nicely. Well, maybe except for the merger, because of this it was different.

So going to the thing, or the driver will read and let me write maps via an interface mpps v13.02 clone? And whether it is possible to disable the EGR including some bit or use the method ecusafe? Did it then DTC will continue to operate?

Thanks, and sorry for so many questions :)

spidi347
New user
 
Posts: 6
Joined: Wed May 21, 2014 8:59 pm
Location: Poland

Re: EGR 1.4 HDi EDC16C34

Postby IvanADE » Sun May 25, 2014 11:02 am

Hi,
EGR you can disable with Volta soft, works ok.

regards
Ivan

IvanADE
New user
 
Posts: 3
Joined: Thu May 09, 2013 7:38 pm
Location: Holland

Re: EGR 1.4 HDi EDC16C34

Postby spidi347 » Fri Jun 13, 2014 5:43 pm

I confirm. Volta method effectively cut off the EGR in my car, thanks :)

spidi347
New user
 
Posts: 6
Joined: Wed May 21, 2014 8:59 pm
Location: Poland


Return to EGR Off

Who is online

Users browsing this forum: No registered users and 1 guest