Hi guys,

This is the first map i modified, it was changed in ECM Titanium so please don't judge me :lol: , i'am trying to understand the basics at the start. This map came from a Peugeot Expert 2.0 HDi(Bosch edc15).

This is what i have done by far:

Injection section - Injection at part throttle, rail pressure;
Turbo - Turbo pressure;
Limiters - Torque limiter;

Wating for opinions :D
------------------------------------------------------

------------------------------------------------------

------------------------------------------------------

Hello,

I was watching your changes, with all due respect I can recommend the following:

Turbo pressure can upload 0,3bar max. (Your uploaded very little)
When rail pressure changes, you must modify pressure limiter rail in the same way
Torque limiter, can rise up to 15% more without problem
Add more injection, there is power


Best regards.

AMP wrote:Hello,

I was watching your changes, with all due respect I can recommend the following:

Turbo pressure can upload 0,3bar max. (Your uploaded very little)
When rail pressure changes, you must modify pressure limiter rail in the same way
Torque limiter, can rise up to 15% more without problem
Add more injection, there is power


Best regards.

Hello friend, thanks for the advices, i dont want to much power because my turbo was recently repaired and this just for tests.
But there is a problem, in my ECM i can't find the right drivers for my ecu, i'am using the Peugeot Partner 2.0 HDi and i want the Expert drivers.

Can you help with this problem, i'am afraid if i put the wrong driver the ecu will block.
Wainting for answers, cheers :P