P0601Check sum error

Posts relating to recovering blocked ECUs

Return to Recovering ECU

P0601Check sum error

Postby jono-9 » Wed Aug 23, 2017 2:20 pm

hi guys, my stepdaughters mk 6 golf 1.6 tdi (2012) has been off road for months,when i checked it, i found injectors were seized, i put a second hand set in it, and it eventually started, but was not firing on number two cylinder, which had a low compression, i found connecting rod was bent on number two, i replaced it, and piston rings, and checked valves,and compression, (over 320 psi on all cylinders) timing was done with pins and crank tool, it now fires when trying to start, but will not run, i have put ross tech on and have got code P0601,(memory check sum error, intermittent) can anyone comment on this, with a possible cure, thanks in advance, John.

jono-9
New user
 
Posts: 13
Joined: Sat Sep 14, 2013 1:17 pm
Location: kent, GB

Re: P0601Check sum error

Postby svkonstantin » Sat Aug 26, 2017 7:38 am

The checksum is for the layout of the file
For each file it must be calculated
Is there anything done on the software

svkonstantin
New user
 
Posts: 21
Joined: Tue Jul 23, 2013 7:30 am
Location: Bulgaria

Re: P0601Check sum error

Postby jono-9 » Sat Aug 26, 2017 5:36 pm

thanks for your reply ! i have tried to send a copy of scan with ross-tech, but apparently, the extension is not allowed, you may have been able to help if i could have sent it, thanks anyway, kind regards, john.

jono-9
New user
 
Posts: 13
Joined: Sat Sep 14, 2013 1:17 pm
Location: kent, GB

Re: P0601Check sum error

Postby eivin96 » Thu Sep 07, 2017 7:45 pm

It seems to be a dead flash.

Send your Ecu to repair

eivin96
Bronze
 
Posts: 31
Joined: Mon Nov 14, 2016 1:27 pm
Location: Germany


Return to Recovering ECU

Who is online

Users browsing this forum: No registered users and 0 guests