Hi , I have a question about DPF OFF in OPEL EDC16C9 ( 1mb flash ) 1.9 CDTI 120 8V hardware 0281012549 software A50359
Car has empty DPF with all sensors conected and working.
In ECU I set DPF as new ( reset DPF and reset differential pressure sensor ) by diagnostic tool and read ECU by BDM for DPF off.
In BDM file I do DPF off manually with Damos help ( without any DTC delete ) and write to car.
For 100 kilometers car drives ok ,no smoke, no glow plugs light , no errors in ECU ,static DPF regeneration by diagnostic tool not working ( good ).
But in diagnostic I can see parameter "Distance traveled since last regeneration" 80 kilometers ( increases with drive ) and "load state particulate filter" 6% and also increases with drive. Its good or bad ?
Becase of time I cant drive car for 100% load state DPF to check what will happen and what DTC will appear.
Is that a way to "cheat" and increase "load state particulate filter" sooner ( with less kilometers )to check what will happen ?
What DTC I have to erase or what to change to stop increase "Distance traveled since last regeneration" and increase "load state particulate filte" ??
Its good or bad solution ?
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.