News of Wanted

HEY!
HAVE SOME ONE ADDED TO EMS2.3 24674698P01 BROADCAST FOR OEM DEF LEVEL GAUGE???
ITS USUALL WORK FOR ACM, BUT IT HAS A BAD TIME, AND I JUST DELETED IT.
NEWER CLUSTERS DONT HAVE JOA PARAMETER TO ADJUST. HAS TO BE BROADCASTED ON J1939.

I HAVE DONE QUICK RESEARCH THAT IT HAS TO BE ON J1939 PNG65110 SPN1761 BUT NO HAS 0 EXPERIANCE WITH THIS SOFTWARE AND CANT FIND A2L:(

WILL PAY FOR GOOD SOLUTION:)

Hello. I'm looking for the original ECU file for the 2017 Ssangyong Tivoli D16DTF 2WD to study its specifications. Thanks!

Hello to all
i m looking for schematics pinouts of this ecu .
looking especially +power ,negativ ,after ignition + and main relay ecu powering command (109)
and glow plug relay pin command.
well in fact all pins description welcome !
thanks a lot

TunerPro XDF for Honda CBR650R (2025, E02)
For Keihin ECU, 1 MB file.

Supported ECU:

38770-MKY-E02

restrictet E02 variant on request



Price: 20 €

Contact me if interested.

I have a 2006 mondeo st 2.2 tdci euro 4 155bhp with straight through exhaust decat and hybrid turbo with egr delete pipe and large fmic and pipework i need a stage 2 map file with egr off

Ok so i have a 2005 subsru wrx with a stock ej20 motor in it which is now blown thanks to a tuning shop in Scottsdale az called Dyno comp. I brought my car in to get a tune and a boost controller put in. And they had the brite idea to gernade my engine. The reason i say this is because of the 4 graphs i was given on a 12 run dyno tests ...

Hi id be forever greatful if someone has FORD FALCON / SPANISH OAK / HACCK strategy damos maps ect ect or Spanish Oak 1024k / Ford Territory EEC-VI

I just did a DPF and EGR delete on my 2012 VW Jetta TDI 2.0L Manual, and need to get it out of limp mode as soon as possible, please reach out.

Can i have stock ECU file pls? 150hp with damos

Hello,

I'm looking for definition files for Ford EDC17CP65 ecu.

I'd be interested in a full mappack/project, A2L, Damos, XDF, etc if one is available.

Any set of files from 17-19 should be okay. Ideally looking for something HC3A-14C204-XXX though.

Current ECU Calibration: HC3A-14C204-ABH

Current file is already modified/working and I have a PCMFlash OBD2 dump if needed. I'm mainly looking to tweak some other parameters in the ECU.

I'm willing to pay depending on ...